Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Auger bits with broken spurs - any use

Posts

Auger bits with broken spurs - any use

#1

Auger bits with broken spurs - any use

Stephen Kirk in Quakertown, PA

>I was at a flea market a while back and a guy gave me a whole pile of auger bits for just a few dollars. Several were missing their spurs, but I didn't mind because the others were OK. Is there any use for an auger bit without a spur? The rest I just need to clean and sharpen - they all have just a bit of surface rust. I also got a circle cutter thrown in which I'm excited to try. I've never used on before.

Re: Auger bits with broken spurs - any use

#2

Do you mean the center driving spur?

Stephen Shepherd in the State of Deseret

>

Re: Auger bits with broken spurs - any use

#3

Re: Auger bits with broken spurs - any use

Bill Houghton, Sebastopol, CA

>If you mean the spurs at the perimeter of the circle, not all auger bits have them - you might post pics here before concluding that they're missing.

That said, I've seen plenty of the common auger bits on which the spurs have been filed almost to oblivion. I've had enough good ones that I've never felt the need to try them out, and have, in fact, passed them along to rummage sales and stuff (I suspect some of these things circulate indefinitely from one rummage sale to the next).

Of course, if you've got a welder or forge, these are raw material if nothing else.