Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

My MKIII Power Sharpener

Posts

My MKIII Power Sharpener

#1

My MKIII Power Sharpener

rarebear

>I started to make my own LV MKII last year yu so you can see those pics at the link below..

I have been using if with just the wooden sides and a plastic top for more than a year..

The top got to hot and would meat and grit would get down into motor and bear area so it needed a redesigned top..

I always had plans to wrap it in steel and after getting a good deal on some stainless steel I when with that..

Feet and handles where made on my 9" metal lathe..

In the next few days I finish the design of a tool reat and holder styled like LVs and I will make four or five 8" platters to mount PSA sand platter to..

I added the feet and air vent as motor gets really hot with no air gaps flatte plane and chisel backs..

This type of machine excels at that function..


img

Re: My MKIII Power Sharpener

#2

Re: My MKIII Power Sharpener

Alan DuBoff

>That is just dandy Johnny!

Very resourceful, looks well built.

Doin' some millin' these days, from the sounds of it, good for 'ya!