A couple of hand tools I've collected
Bart Leetch
>I was going through the few hand tool I've collected & decided I needed to take a picture.
Knowledge You Can Build On — Est. 1998
A couple of hand tools I've collected
Bart Leetch
>I was going through the few hand tool I've collected & decided I needed to take a picture.
Sweet!! That looks like....................
richard jones
>one big honkin' plumb bob!!!
Can't tell from the pic, is that an old-style 11-notch 9 1/2 next to the blue one? Old guy that taught me gave me one of those once, one of my most prized possessions.
Disston saw vise?
Hope you have fun with it. Collecting, cleaning, sharpening, etc., is fun in and of itself. And we often even find time to actually do some work with those tools!!
Rich
Observation
wilbur
>The spot at the middle front edge of your workbench looks a little empty. Obviously, you'll need to fill it up. :@)
Interesting Yankee-type screwdriver
Bill Houghton, Sebastopol, CA
>Down front, just to the left of the block plane battalion, you've got some push drills and what looks like the body of a Yankee screwdriver with a crutch-type handle fitted to it. Is that a true Yankee driver (North Bros. or Stanley), or did some manufacturer clone the mechanical parts and add that clever handle?
Re: Interesting Yankee-type screwdriver
Bart Leetch
>Bill Houghton
�Down front, just to the left of the block plane battalion, you've got some push drills and what looks like the body of a Yankee screwdriver with a crutch-type handle fitted to it. Is that a true Yankee driver (North Bros. or Stanley), or did some manufacturer clone the mechanical parts and add that clever handle?�
Its a Miller Falls #430.
Re: Sweet!! That looks like....................
Bart Leetch
>Richard Jones
�Can't tell from the pic, is that an old-style 11-notch 9 1/2 next to the blue one? Old guy that taught me gave me one of those once, one of my most prized possessions.
Disston saw vise?�
I am not really sure about the Block plane but I picked it up for almost nothing, you'll notice that the little lever & casting id broken out of the cap. I sure would like to replace that cap but I just loved the way it fit in my hand. It also have a adjustable mouth.
I am not sure about the saw vise either there are no makrkings on it but its all there & seems to clamp a saw well.
Re: Sweet!! That looks like....................
richard jones
>Yeah, 9 1/2, you can pick up parts, etc., really inexpensive. Whole plane won't set you back but $10-15..........adjustment is sweet for some really thin shavings, and does a great job on end grain.
Rich
Hey Bart...
Scott Burr in Ben Lomond CA
>I probably have a replacement lever cap lying around if you want it. Give me a ping off line. My home 'puter is in the shop getting a lobotomy; I'll get back to you in a day or two.
Nice stash you got there...
Scott Burr in Ben Lomond CA
>Three No. 78!?! Dang man you only have two hands. You planing with your feet too...
;^)
Re: Nice stash you got there...
Bart Leetch
>Three No. 78!?! Dang man you only have two hands. You planing with your feet too...
;^)
I had one & a friend gave me one then Dad gave me his.
Re: Hey Bart...
Bart Leetch I probably have a replacement lever cap lying around if you want it. Give me a ping off line. My home 'puter is in the shop getting a lobotomy; I'll get back to you in a day or two. I tried to E-mail you but it was kicked back. The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'scottb@cruzio.com'. Subject 'Hey Bart... lever cap for a 9 1/2', Account: 'nerdshack.com (1)', Server: 'nerdshack.com', Protocol: SMTP, Server Response: '554 Recipient is not recognized. Relay access denied.', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79
>Hey Bart...
Scott Burr in Ben Lomond CA
Ahhhh Figures...
Scott Burr in Ben Lomond CA
>Like I said my home computer is in the shop for a few days. Try me again on the weekend. I should have it back up and running then.
Re: Ahhhh Figures...
Bart Leetch
>Hi Scott I
ll try again but I don't think this has anything to do with your computer not being there.
one of the recipients was rejected by the server. The rejected e-mail address was 'scottb@cruzio.com'.
Give it another try Bart...
Scott Burr in Ben Lomond CA
>I got back yesterday. It's up and running now.
Re: Give it another try Bart...
Bart Leetch
>Hi Scott
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'scottb@cruzio.com'. Subject 'Hey Bart... lever cap for a 9 1/2', Account: 'nerdshack.com (1)', Server: 'nerdshack.com', Protocol: SMTP, Server Response: '554 Recipient is not recognized. Relay access denied.', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79
Dang...
Scott Burr in Ben Lomond CA
>I have no clue what the problem is. If you want can you post your email and I can send you one.
No good deed goes unpunished!
Re: Dang...
Bart Leetch
>OK here it is do the remove thing & fire when ready. originalbart(remove)@nerdshack.com
Re: Interesting Yankee-type screwdriver
Andy Lincoln,In Dearborn MI
>Bill,
It looks like you will have a new quest for garage sale season.
once you find the first one,I bet 10 more will pop up.
Andy
Stanley 271 is the next likely find
Bill Houghton, Sebastopol, CA
>since I recently purchased the Veritas small router plane, it's time to start finding 271s at $1 each. This, by the way, is a nifty redesign of the tool. Reversing it for bullnose work takes about ten seconds, probably much less than on the Stanley, and you can flip the cutting iron up sideways for compact storage if need be. Still looking for the setscrews, though.