Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Aaaaarrrgggggghhhh! Binks # & Spray Gun

Posts

Aaaaarrrgggggghhhh! Binks # & Spray Gun

#1

Aaaaarrrgggggghhhh! Binks # & Spray Gun

Barry Turner

>I spent two (2) hours tonight carefully reassembling my Binks # 7 spray gun and installing the rebuild parts. I lubricated all of the friction points with gun grease or gun oil and replaced all of the packing and some other parts. I poured some thinner in the cup and tried it. The needles no longer stick when you release the trigger, it seems to work fine, but the damned thing still squirts a several drops of thinner after you release the trigger, just like before. That ain't gonna work. I can't imagine what could have happened to it that would make it do that. Nothing I do to it helps. Makes me want to beat that SOB flat with the hammer and sneak it into the trash can!

Re: Aaaaarrrgggggghhhh! Binks # & Spray Gun

#2

Re: That's Binks No. 7

Barry Turner

>

Re: Aaaaarrrgggggghhhh! Binks # & Spray Gun

#3

Re: Aaaaarrrgggggghhhh! Binks # & Spray Gun

Bob Barkto

>Usually means the needle isn't seating properly.

Check for material buildup in the seat and on the needle.

A new needle and seat may be in order if either is worn excessively or damaged. I don't know if the seat is part of a standard rebuild kit.