Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Carved frame

Posts

Carved frame

#1

Carved frame

Moses Yoder in White Pigeon, MI

>My wife Megan's sister died about 4 years ago, and Megan stitched this sampler for her parents in memory of her sister Rachel. Rachel really enjoyed celtic art and I thought it would be apropriate to put a celtic knot on the frame. I had not done any carving before; art was really not encouraged much in the household I grew up in and I thought the ability to carve was beyond anything I can do. While the experience on this frame has to some degree reinforced that belief I realize now that everyone has an artistic ability which can be developed to varying degrees simply by practicing. The frame is just a simple carved knot at the top with the center section of the frame around the perimeter let in with a small gouge that left a rough somewhat uniform textured surface. I used my #66 beader to bead the edges of the frame slightly, leaving a small flat section at the top of the bead.


img

Re: Carved frame

#2

Re:closeup of the knot 

Moses Yoder in White Pigeon, MI

>


img

Re: Carved frame

#3

Re: Carved frame

Andrew Lunn

>Hi Moses,

I think your frame turned out really nice. I like its lines and proportions--very nice. I also like the way you framed the scalloped texturing with those beads. I think the beads give the frame a strong outline, and that works really well with the scalloped interior. You mention that you have no carving background, but I think you found you didn't need it--a little carving goes a long way when you get the lines, proportions, and composition right. Thanks for sharing. Looks like a terrific way to remember someone special.

Re: Carved frame

#4

Re: Carved frame

Michael Stadulis in Southern NJ------WebKitFormBou

>Hi Moses,

I like it very much. Twenty years ago when my sister in law, Sally was the Godmother to our then infant daughter Marietta. Sally is a terrific seamstress and can sew a wedding gown in a few days if she had to. Sally sewed Marietta an absolutely beautiful alphabet sampler as a Godmother gift. She had it framed in a beautiful picture frame which I always liked a lot......... until I see how wonderfully your framed sampler turned out. The handwork of the frame really compliments the handwork of the sampler. Very nicely done!!!

Mike

Re: Carved frame

#5

Wonderful ! . . .

steve mackay

>and no paint. Ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh ! With the stitching/fabric, what glass did you use ?

Re: Carved frame

#6

Re: Carved frame

Dave Mount

>Morning Moses--

I think there was a thread a while back about how often a perceived lack of ability is really just a lack of trying your hand at something -- certainly looks to have been the case for you. The frame looks great. I really like the combo arch inside, cathedral arch outside on the top.

Best,

Dave

Re: Carved frame

#7

Inspirational! and pretty!

Bill Houghton, Sebastopol, CA

>

Re: Carved frame

#8

Agree

Wiley Horne -- So. Calif.

>To this eye, Moses made the right calls on three things. One, that Dave calls out, is the inflection of the upper line of the arch. Two, and Michael pointed this out, is the way the carved texturing reflects the texture of the needlework. Three is the bead that ties it all together.

This is really a beautiful way to remember a lost loved one.

Wiley

Re: Carved frame

#9

Very nice!

Eddie Pacheco; San Jose, Ca.

>I think when the heart is involved the brain reaches a little deeper for better eye/hand coordination. Really a nice frame.

Re: Carved frame

#10

Tasteful proportions and texture. Lovely.

David Barnett - SW Florida

>

Re: Carved frame

#11

Re: glass

Moses Yoder in White Pigeon, MI

>Thanks for the kind comments. The fabric sets back from the glass a little bit, about 1/2". It's hard to see in the pic. I just used a standard double strength glass. I have not looked into glass that reduces uv rays or whatever, in fact you might consider me a glass idiot ;) I try to hang pictures where they will not receive any direct sunlight.

Re: Carved frame

#12

Re: glass

steve mackay

>I just use " glass " also and everyone ( who may or may not know ) has opinions on UV, safety, non-glare, etc. I asked my glass guy once about other flavors and was terrified by the prices. I usually do prints that also get hung indoors away from windows so just gimme " glass " !

Re: Carved frame

#13

Very nice Moses...

Scott Burr in Ben Lomond CA

>I can't think of anything to say that hasn't been said all ready. A job well done.

The jointery appears to be mitered. Are they reinforced in any way? Also having zero carving experance myself how long did it take to to complete?

Re: Carved frame

#14

Re: splines

Moses Yoder in White Pigeon, MI

>I like to simply miter picture frames then glue them together with a strap clamp. After the glue is dried I have a jig used in conjunction with a tailed apprentice that makes a nice 1/8" wide cut in the corners of the frame and glue in splines. I always use a contrasting wood for the splines, which I think was ebony on this frame. In my experience this is the best way to get a strong clean joint. Carving the knot on the second piece for the top took me about an hour. The first piece came out just as well except that the idiot who cut the miters forgot to check his math and simply cut the ends at 45�. When I fit these together I remembered that when I had made the drawing for it I knew I would have to check the correct angle because the ends of the top rail are narrower than the side rails. So the second piece was just as much fun as the first piece. The straight peices took about 20 minutes or so each. I made the whole frame over a period of several weeks, but it could probably easily be done in a weekend. I want to do more carving for frames; I have found a number of patterns designed for frames taht will take a bit more work to carve. I find carving wood is a great experience; it gives me a good apreciation and feeling of the material.