Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Binks # 7 Spray Gun

Posts

Binks # 7 Spray Gun

#1

Binks # 7 Spray Gun

Barry Turner

>I hope this is not too far off topic. I have a Binks # 7 left over from my days of refinishing and building furniture. It has not been used very much in several years. I tried to use it Monday night and decided it needs a rebuild kit. I checked with some auto body supply shops inquiring about a rebuild kit for it. No one had rebuild kits. No one would rebuild my gun for me. Several people said they had never seen one. You would have thought I was asking about a bearing for a chariot wheel! The guy at my local body shop said, "That's about like trying to paint with a garden hose!" Is this spray gun that ancient? It was state of the art in 1975 and Binks is still selling new ones. What's up with this? Are the new guns that much better? Do I need to buy a new high tech gun? Does anyone have a new high-tech gun? What's the brand of choice these days. Dang, I suddenly feel old!

Re: Binks # 7 Spray Gun

#2

Re: Binks # 7 Spray Gun

L. Hanson

>Back in the 70's, they were the Cadillac's of spray guns....

They still are - just that a 70's Cadillac isn't worth as much as it used to be...

I have one, but technology in the field of spray guns has advanced so very far in the last years... today's best are possible a SATA or a Devilbiss, depending on who you talk to, but I'm so far out of date that I couldn't say myself...

Leif

www.norsewoodsmith.com

Re: Binks # 7 Spray Gun

#3

Re: Binks # 7 Spray Gun *LINK*

Marv....... Northern California Lake Co.

>Hi Barry,

Below is a link to an eBay auction where you can buy a repair kit for $10.00

There are other auctions where you can buy the entire gun for about $40.00

Good luck,

Marv


Binks #7 Repair Kit

Re: Binks # 7 Spray Gun

#4

Re: Binks # 7 Spray Gun

Robin Corell in Atascadero, CA

>I also have a Binks 7. It is still a good gun but will require a bit of trial and error in thining and playing with preasure to get a decent finish with the new paints designed to be applied with the new HVLP guns. If all you are doing is shooting something like Deft it will work fine.

The seals in the Binks are leather and will dry out and shrink if the gun is not stored with a bit of thinnner in the cup. If your gun is dry you can try taking it appart and soaking the seals in some thinner.

Robin

Re: Binks # 7 Spray Gun

#5

Re: Binks # 7 Spray Gun

Barry Turner

>Thanks. That's when I bought mine, the late 70's. Since I no longer build furniture or refinish furniture, I no longer use my Binks very often. Most turnings that I do are finished with tung oil, a wiping polyurethane or Watco, none of which need a spray gun. What little spray finishing I do is with Deft lacquer or Minwax poly from a spray can. No clean-up, no fuss. I'm really so far behind in spray technology that I doubt I'm even competent to buy a new gun.

Re: Binks # 7 Spray Gun

#6

Re: Binks # 7 Spray Gun

Barry Turner

>All I ever try to spray is thinned clear lacquer. Sometimes Deft. Usually, I just get Deft in spray cans so I don't clean-up to deal with.

I tried to spray a shelf I made for a co-worker last Monday night and the gun was terrible. It was spitting and skipping. The needles were sticking when I triggered the gun. I tried a bit of oil on the packing, cut it didn't seem to help. It had been hanging on the wall for about five years with thinner in the cup, but it was dried out. I'm sure all the packing needs to be replaced.

Re: Binks # 7 Spray Gun

#7

Re: Binks # 7 Spray Gun

ThomD

>Another reason why people don't rebuild these days whether kits are there or not, is because you can buy a new gun for what the rebuild cost. You can buy a workable HVLP gun with an flashy anodized body for about 15 bucks. I had a friend for a while who was a pro spray guy, and though he had a huge sprayer in his mini van that was powerful enough to spray driveway topcoating, he would also run a lacquer job off the same compressor and just use one of these little HVLP guns, we aren't talking custom painting skulls here, but it worked for smooth finishes.