Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Hand Saw Class - Chris Schwarz

Posts

Hand Saw Class - Chris Schwarz

#1

Hand Saw Class - Chris Schwarz

Jim Shaver Oakville, Ontario

>Hi All,

Yesterday (Sunday) I attended a class given by Chris Schwarz on hand sawing. It was given at the Woodcraft store in Sterling Heights Michigan. I drove down to the class with a good friend of mine, Steve Evans.

Chris is a very good presenter, teacher and humorist. As many of us know he has a passion for the history and accurate interpretation of hand tools, their provenance and usage over time.

Chris gave a very comprehensive talk on types of saws, their classifications, tooth geometry and characteristics. He also gave a great talk on the advantages of configurations of tooth geometry within a variety of cross cut and rip saws.

Photobucket

The practical exercise of the class was to build a saw bench out of tropical southern pine, well for Canadians southern pine is an exotic wood. Chris began with us sawing on some scrap wood and working through a variety of sawing techniques, finally finding the one that proved to be a combination of good stance, controlled motion and relaxed grip.

Photobucket

Chris wielding his Wenzloff Kenyon tenon saw!

Photobucket

Chris making a Class 1 cut with his Sash back saw

Photobucket

Chris face planning a half lap with a router plane

Photobucket

Shooting shoulders�

Through out the class we worked in a series of steps that were spaced with instructional breaks as we worked on details of the project.

Photobucket

Steve making a Class 2 cut!

Steve and I both had a compliment of Medallion saws made by a friend (Ed) who lives in Oakville. Ed�s saws were great, a definite fit for the Canadian Back Bencher�s (Chris named Steve and I that as we were on the back bench).

Photobucket

Steve and I must have been separated at birth, look at our bench organization skills!

Photobucket

We had a great day, lot�s of learning, great classmates and we all enjoyed Chris�s teaching.

Sawing wood by hand is really a combination of skills and selected tools, I have a new appreciation for the process and plan on developing it more as time goes on. I am still going over my notes from the class, it is really amazing how much you can accomplish with the right techniques and a few select tools.

Thanks Steve, it was Good Flying with you in the Right seat my friend.

Take care,

Jim

Re: Hand Saw Class - Chris Schwarz

#2

Re: Hand Saw Class - Chris Schwarz

wilbur

>Jealous, jealous, jealous. Sounds like it was a great class.

Any tidbits you'd like to pass on to those if us not close to Michigan/Ontario?

Re: Hand Saw Class - Chris Schwarz

#3

Great Classes

David Cockey

>I also took the sawing class along with the dovetail class the day before. Not quite as long a drive for me as I live about 15 minutes north of the store but every bit as worthwhile. Chris is a very effective teacher with a good balance of lecture, demonstrations and hands-on experience. The sawbench is a brillant class project - useful when completed, able to be finished or nearly finished in a single day class, and since it's for the shop not so much worry about making a mistake so I could focus on learning. Besides sawing itself there a number of tips and techniques related to joinerly. Using the router plane to equally level tenons is brillant. I surprised and impressed myself with how accurately I was sawing by the end of the day though there is still room for lots of improvement. And for many cuts I'll be reaching for a handsaw rather than setting up the tablesaw. Next weekend I expect to be practicing sawing on a much delayed workbench project.

The dovetailing class was also excellent. I've never tried dovetailing (other than with a Leigh jig) nor any hand cut precision joints. The same comments apply about Chris as a teacher. The project is a simple silverware tray which Chris didn't expect us to get very far on. But I learned enough that with some more practice I should be able to complete it in a presentable manner. My understanding is that this class is usually several days and it would have benefited from being longer. But still very, very worthwhile.

Re: Hand Saw Class - Chris Schwarz

#4

Looks like a fun time. I have a question too...

Scott Burr in Ben Lomond CA

>You mentioned class 1 and class 2 cuts. What are they and what are the differences between them?

I sure do wish classes like this would come to my neighborhood.

Re: Hand Saw Class - Chris Schwarz

#5

Ah, sounds like you'll need to check your issue #9

Alan DuBoff

>Scott,

Chris mentioned that the recent issue #9 of Woodworking magazine has an article explaining the different class cuts, which he explained a bit at the LN Hand Tool Event in Oakland. There are 3 classes if I recall, depending on the result/position in the work.

I haven't received my magazine yet so I haven't been able to read the article, and he just went over it briefly.

Re: Hand Saw Class - Chris Schwarz

#6

Class Of Cuts

Jim Shaver Oakville, Ontario

>Hi Scott,

Ah, yes, it was something new to me too. Chris described three class of saw cuts as follows

1st Class> Accuracy and appearace are important (a joinery cut that has high potential visability)

2nd Class> Accuracy is important, appearance not so important (a joinery cut where only the bugs will see the details)

3rd Class> A rough cut where accuracy or appearence are not critical (typical of sizing of rough stock)

Hope that helps,

Take care,

Jim

Re: Hand Saw Class - Chris Schwarz

#8

Re: Class Of Cuts

David Cockey

>Class 3 - Start sawing without any prep other than marking the intended location of the cut.

Class 2 - Mark cut on all show surfaces with knife (or chisel). Cut a corner notch with a chisel or knife to aid in starting the cut in the proper corner.

Class 1 - Cut a shoulder along the waste side of location of the cut with a chisel before sawing. Produces a clean cut and helps in guiding the saw.

All is revealed in Woodworking #9 (in the mail this week to subscribers).

Re: Hand Saw Class - Chris Schwarz

#10

Re: Bob Wearing...

paul womack

>...uses this terminology in "The essential woodworker"

BugBear

Re: Hand Saw Class - Chris Schwarz

#11

Re: Bob Wearing...

Warren in Lancaster, PA

>Thanks, BugBear. Although I never heard this terminology before, I did think it had that old Twentieth Century ring to it.