We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Cleaning up a no-name #3 body. Going to infill with some scrap purple heart just for kicks. Was just about to start japaning the body when the thought occured . . . do we even WANT to put a finnish on the inside of the body ? I might think so for rust prevention but there might be some " cosmic " considerations I'm not aware of. Thoughts ?
>maybe inside the gusset by the throat, since that would be exposed. I think for the rest of it, you'll have an easier time holding in the blocks with some form of epoxy (in addition to whatever pins you plan on using) and I think for that that you'll get a better grip on raw cast iron.
Other odd things that come to mind...
-might want to design your infills to take advantage of the few places where the metal is already tapped. For instance, you might be able to use the frog screws to help hold down part of the bed. Or bolt on the bun using the existing knob mount, and then inlay something over the hole for the screw.
>where I was going ! ! ! Didn't think of the epoxy though. THATS the " cosmic " I was looking for. Bond to raw iron AND protect/seal it. Your a Genius ! Thank you. I HAD thought of useing the excisting mountings but got some negative feedback on it. You might have locked that one in also. Its only a cheap plane so no real loss but would like to see what comes out. Might make me rich. : )