Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

My stack of wood project (pics included)

Posts

My stack of wood project (pics included)

#1

My stack of wood project (pics included)

wilbur

>So here's my entry to our woodworking club's "Stack of Wood" contest. It's a benchtop tool rack for my commonly used chisels, saws, and hammers.


If you were on the weekly chat last week, you'll recall me griping about our woodworking club's "Stack of Wood" contest. The Stack of Wood contest is something our club does every year. One of the members has a woodworking business, and he puts together a stack of wood, primarily from cutoffs from his business. He donates the wood, contestants pay $10 per stack, and the club gets the money.

This is the first time I entered the contest, since I'm still a beginner in many ways. This was a bad move on my part. This year, the stack of wood seemed to come from a flooring job. The wood was primarily South American species from flooring stock. So the stack was made of long skinny and/or thin pieces of very hard wood with extreme amounts of cross grain, which made working with it really difficult. My neighbor said that he burned out two bandsaw blades and a set of planer blades working with this stuff.

Since this was a rack for my hand tools, I wanted to do this project as much by hand as possible. Other than initial jointing and planing of the South American maple by machine, I can say that this was otherwise completely made with hand tools.

The first thing I did was to try to plane the various pieces of wood. I found that I only had four pieces of wood out of the stack that I thought I could deal with. I don't remember the actual species names, but they were the South American equivalents of maple and walnut. The rest were jatoba and African mahoghany, and I passed on trying to use those. The South American walnut was pretty easy to use, if you paid attention to the grain direction. However, there were only two 6" long skinny pieces in the stack. The South American maple was easier to work with than the rest of the wood, but not by much.

The two legs of the base were joined with double 1/4" (actually 6mm) mortise and tenons. I wish i had taken a picture of that joint before I glued it up -- I was pretty proud of that one. The riser piece was joined to the base with a mortise and tenon joint as well.


Here's a detail of the leg. I chamfered almost all the corners of the pieces of the tool rack. I like how all the chamfers come together at a point.


I decided to try a sliding dovetail to join the crossbar to the riser. This was partly because I was using this project to try out new techniques, and partly because I was tired of making mortise and tenon joints. This is the crappiest sliding dovetail you'll ever see. I was getting all types of tearout when trying to make the male part of this joint.


Here's a detail shot of the crosspiece that holds the tools. This initially was just going to be a rack to hold my saws to get them off the thing that serves as my workbench, but I found that the crosspiece was long enough that I could fit my other frequently used hand tools on it as well.


You can see where I inlaid a strip of the South American walnut. I used a Japanese plow plane to cut the slot for the inlay, and also to make the recess that the tools can sit in. I cut out slots in the crosspiece to hold the hand tools I seem to be using most often. For the chisels, I used a brace and a Forstner bit to make a round hole for the chisel, and then cut out an access slot in front. That's when I learned why the bargain $20 for a set of 7 Forstner bits are so inexpensive. Time to place an order with Lee Valley. Hopefully you can see the chamfering I did on this part as well.

The inlay was a bit of a disaster. I didn't pay attention to grain direction when I first inlaid the South american walnut strips. As I said before, this wood was nice to work with -- unless you wind up planing across the grain. Because I didn't pay attention to the grain direction when gluing the strips in, this is what I wound up with. The tearout was so bad that I had to completely dig out the inlay and start all over with this part.

I decided not to use any finish. Despite the tearout issues I was having, the surfaces that planed well had a smooth enough surface that I decided to leave them be.

Hope you all like it. It was fun using this as an opportunity to try joints that I hadn't made before. I also learned all sorts of lessons about grain direction and planning for that when building a piece. I also got lots of practice sawing to a line, sharpening, and tuning up my Japanese planes.

Re: My stack of wood project (pics included)

#2

Nice to have pics to see what you made

Stephen Shepherd in the State of Deseret

>Your discussion in the chat about the nasty wood, looks like you handled that stack of wood properly.

Nice design with a small footprint on the bench. How is the balance?

Did you win first prize?

Stephen

Re: My stack of wood project (pics included)

#3

Re: Nice to have pics to see what you made

wilbur

>Hi Stephen,

Thanks for the comments! The balance is pretty good. With the tools in the rack it's even better. If I had put a short leg from the corner of the base extending back, that would have been really good.

The contest is Wednesday night. I don't really expect to win, and if you saw the work that the other members in our club can do, you'll know why.

Of course, now I'm thinking maybe I have enough time tonight to try that short leg idea.

Re: My stack of wood project (pics included)

#4

Re: Nice to have pics to see what you made

Miles

>Wilbur, I'll second the 'nice work' comments and add a question - what's the handle of that nice little wooden mallet made of? I think it looks like holm oak / green oak to me and I'd like to know if this interesting and unusual wood (I have a little, hence the curiousity) does get used sometimes.

I'm just making a mallet head out of a holm oak log-end, as it is so hard and dense. I'm glad I didn't have to chop the mortise out without pre-drilling....

cheers

Miles (who likes making stuff out of odds and ends, especially if they are bits cut from one's own trees)

Re: My stack of wood project (pics included)

#5

Love the stack of wood.

BobStrawn

>Very nice, simplicity, functionality and grace. I will keep the idea in mind.

Bob

Re: My stack of wood project (pics included)

#6

Re: My stack of wood project (pics included)

James Watriss

>It's great to see simple, functional designs come to fruition.

My only advice... I'd keep that thing clamped down! I get a little too involved sometimes in what I'm doing, and I'd be very likely to swing a board around and send the whole rack flying.

Nice job. :)

Re: My stack of wood project (pics included)

#7

Nice chisels...

Scott Burr in Ben Lomond CA

>And the racks not bad either! I too would be scared on knocking it over if it was on my workbench.

Re: My stack of wood project (pics included)

#8

Yeah, clamp or make a sliding slot in...

Pam Niedermayer - Austin, TX

>the benchtop or something. Very nice, Wilbur. I like that it also serves as a plane rest.

Pam

Re: My stack of wood project (pics included)

#9

Wooden mallet

wilbur

>I actually bought the wooden mallet from Japan Woodworker. It's made with Japanese white oak. It's not quite as heavy or as dense as domestic white oak, and is finer grained.