Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

My 9" froe is to short

Posts

My 9" froe is to short

#1

My 9" froe is to short

Todd O. Cronkhite Maine Native, Presently Away

>My old homemade, flea market found froe is just dang short to be an effective user, so I need to get another one. what length and width would you long time froe users suggest to be the best all around size? Mine is 2 1/2" wide, which I think is o.k., but perhaps not. Also, I'd be interested in finding a dealer that deals in them and is not overly expensive. I think I'd prefer a vintage one over a new one anyhow. If worse comes to worse, I can also contact Phil Koontz up at Galena Forge and have either he, or Jake the Russian make one for me.

I suppose it would be best to have the froe exceed the diameter of the wood being froe'd so perhaps I'd need several lengths and widths as well eh?

T.O.

Re: My 9" froe is to short

#2

Re: My 9" froe is to short *LINK*

Jim in VA

>Drew Langsner of Country Workshops sells new ones that are 12 inches long. I figure he knows something about riving wood. Since they are not quite traditional looking, they may not be what you want, but I included the link in case you are curious.


Country Workshops

Re: My 9" froe is to short

#3

Re: My 9" froe is to short

Kevin French, Antrim, NH

>T.O. my Froe is 14.5" x 2", not an oldie or sure of the quality, but it was free.

And YES it makes it easier to beat if it's longer then the piece your split'n.

Re: My 9" froe is to short

#4

Re: My 9" froe is to short

Todd O. Cronkhite Maine Native, Presently Away

>Thanks Kevin. I did some measuring and it seems that between 14-16" should be adequate for a general user. I figure that at least 2" inches wide is about right as well. I feel that starting at a 1/4" across the top and tapering down to the edge is about right as well to give a good wedging effect.

Anybody got one fitting this description that they'd care to part with?

T.O.