Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Emmert Horse is functioning! *LINK*

Posts

Emmert Horse is functioning! *LINK*

#1

Emmert Horse is functioning! *LINK*

Alan DuBoff

>Amongst my gazillion projects (is gazillion a word? sure it is;-), my workbench is approaching the final stages, and I got the vise lined with leather over the weekend. Boy howdy that Barge cement has some strong fumes...whew...good think for the window and the door, they let allow fresh air to come in...hehehe...

Anyhow, I lined the jaws of my emmert clone with some 16 oz leather, this is about 1/4" thick, and it is so nice, I have never used such a nice woodworking vise in my life.

One of the benifits of the patternmaker's style vise to me is the fact that you can use it as a shaving and/or stitching horse, and since I will be doing both, this will come in handy.

I have also seen many a folk' mount the pattern maker's vise flush, but since I have no plans to use it as a front vise, I wanted to have it out from the bench end, so that I could have good access to it's positions. Maybe that was a mistake in my thinking, but it certainly seems functional for me.

There's a small drive-by with an inlay leg that Steve Latta did at the LN Hand Tool event in Oakland a couple weeks ago. Not to worry, I wasn't going to rasp the inlays out! *gd&r*

See linky...


img

Emmert Horse (for po' boy shaving and stitchin')

Re: Emmert Horse is functioning! *LINK*

#2

Re: Emmert Horse is functioning!

Dean Lapinel

>A really nice lookin set up there!!

As I gazed on a gazillion gadgets in the photo I saw a lathe in the back. I went to your web page and you don't introduce that particular piece.

Re: Emmert Horse is functioning! *LINK*

#3

Re: Emmert Horse is functioning! *LINK*

Alan DuBoff

>Dean wrote:

"As I gazed on a gazillion gadgets in the photo I saw a lathe in the back. I went to your web page and you don't introduce that particular piece."

Actually in many cases you just need to know where the link is.;-)

Check the linky on this post.


Goodell's Improved Mini-Lathe/Scroll-Saw

Re: Emmert Horse is functioning! *LINK*

#4

No... *LINK*

Scott Burr in Ben Lomond CA

>Gazillion is a fictitious number.

Oh yea, and the Emmert vice, YOU SUCK!

Nice set-up and shop you have!


Wiki

Re: Emmert Horse is functioning! *LINK*

#5

Giddy-up!

Todd O. Cronkhite Maine Native, Presently Away

>Geez, is that your shop?! Sure like that floor! Tell us more about it.

T.O.

Re: Emmert Horse is functioning! *LINK*

#6

Not too much to say...

Alan DuBoff

>Todd wrote:

"Geez, is that your shop?! Sure like that floor! Tell us more about it."

Not too much to say about it, it was a project that got me back into woodworking, originally planned to be shared as a music study. After completing the office I realized I wanted to do more woodworking, and am planning to build my own round log timberframe home. I will not do the log work, but have already been working on the designs with the builder and his on staff architect.

Since I will live in my current home while I build the home, I wanted better shop space which I could use during the week, and go up to the building site on the weekends.

Floor is solid purple heart, 3/4" thick. It was about $4.95 sq.ft, from Lumber Liquidators. It was pre-finished, and I used an air stapler...it was much easier than the walls which presented several obstacles like windows lights, electrical outlets. There's like a dozen electrical outlets, 2 on each wall at minimum and larger ones where the networking comes in. There's a separate sub panel for the electrical. There's links from most of my galleries at the bottom for my backyard office project. I had the shed built for me (next time would do it myself, but this worked out ok). It is built using typical 16" OC studs, although the outside shell is fairly light. The company did the plans, got them approved by the city, and knew concrete and electrical folks. I then completed the inside myself adding about 1500 bf of 1x6 knotty pine to the walls and ceiling, and purple heart to the floor. It would have cost me 3x the cost to have an architect design it and built out of stick frame.

The other side is my office...see pic below. The shed is 10'x20', and is an accessory building (i.e., detached from my house). It's completely permitted for foundation, electrical, house has cat 5 running from all bedrooms, family room, and hall closet for wifi. It resides 7' from my master bedroom, where I added an exterior door and small deck for easy access, my commute is often that 7' from the house...*lol*

I know some folks have seen it already, and heard me talk about it, so this is all a big yawn to them...:-/


img

Re: Emmert Horse is functioning! *LINK*

#7

You're welcome to visit sometime...

Alan DuBoff

>Scott,

You're only like 20 minutes away, and welcome to come over sometime. I need a few weeks to get things setup better, but never too proud to have visitors. Let me know if you come over the hill sometime...

I used to like to drive up through the summit and up to Boulder Creek sometimes, love that drive outta big basin. And there's nothing quite like the skyline when you're just above the cloud layer, that's certainly one of my faves in the area.

I have some Foley equipment and you're welcome to stamp some teeth if you like as well. I'm working on this handle, trying to see if I can finish up for the toolmaking contest. No commitment yet though until I get it done...;-)

This handle is what I derived out of the lamb's tongue style London pattern handles I posted a while back. This is more like a Mick Jagger tongue...*lol*


img

Re: Emmert Horse is functioning! *LINK*

#8

Re: Emmert Horse is functioning!

Greg B�tit, Vergennes VT

>I faced mine with two pieces of 3/8" pine that have rare earth magnets inletted & glued into it. I can't find 16 Oz. leather anywhere, I had to resign to two pieces glued together for the leg vise on the other bench. Where did you get your leather?

greg

Re: Emmert Horse is functioning! *LINK*

#9

"Let me know if you come over the hill sometime"

Scott Burr in Ben Lomond CA

>Hi Alan,

I do it 5 days a week. I work for a company by the Fry's off Brokaw Rd.

I'd be honered to pay you a visit sometime in the future. Perhaps I can fondle the Emmert...

BTW, nice looking handle. At least it doesn't look like Gene Simmon's tongue.8^)

I hope you get it done on time.

Re: Emmert Horse is functioning! *LINK*

#10

Hey, I met him!

Alan DuBoff

>Scott,

Funny, but I am from L.A. and I used to own a vintage guitar store before getting into computers (a long story;-). Anyway, I have met Gene Simmons before, very nice guy. A friend played guitar for them after Ace Frehley left, he went by the name Vinnie Vincent. This is more of a Jagger tongue, IMO...LOL! Gene's tongue was thin and lonnnnngggg, and this tongue on the handle is shorter and fat.;-)

Yeah, we could do a 'que sometime, make some sawdust, smash some hot metal, or make some swarf...I have driven by that Frys I think, but mostly go to the one at Lawrence/Arquez. I live by Prospect between DeAnza and Lawrence, in West San Jose over by Cupertino. That's very close, I'm like 5 - 10 minutes out of your way...

If you're interested in making your own saws, stamping the teeth is one of the obstacles one needs to jump over...the Foley isn't bad...it's quite nice actually....(if you've ever tried to shape teeth by hand). I can do them by hand, but not worth the time for me, I consider my time more valuable...(so I can waste it on something else...I have no lack of time wasters...;-).

Re: Emmert Horse is functioning! *LINK*

#11

Got the leather on ebay *LINK*

Alan DuBoff

>Greg asked:

"Where did you get your leather?"

Greg,

I bought it on ebay, it was scraps for $29 for about 10 sq.ft. of scraps, most was at least 12" x 12", and I just used 2 pieces that looked ok. The seller was "Danerous Threads", and the quality was good. I'll link to the same auction. $29 bid, or $32 Buy-It-Now. Hope that helps...

I have to tell you though, I just bought a shoulder of 7 oz. from Tandy, and while it is only 1/8" thick, it is a very nice piece of leather also, and it's about 8.5 sq.ft. so it's a large piece. This is better suited for sheaths, and was on sale for $3.49/sq.ft. It was like $30 also...those are on sale now, if you have a local Tandy, you might want to check them out. I have a twin-screw on the front of my bench and might just use the 7 oz. for that as I could use a single piece. That 16 oz. is really nice and thick, it's almost like wood...it's beautiful stuff. I'll link to the Buy-It-Now. HTH.


img

Dangerous Threads

Re: Emmert Horse is functioning! *LINK*

#12

I'll take you up on your offer sometime!

Scott Burr in Ben Lomond CA

>Never tried my hand at makin' saws could be fun to try.

Vinnie Vincent, cool. Although I was dischaged from the KISS ARMY after they did "I was made for loving you". I guess a better term would be AWOL;^)

Re: Emmert Horse is functioning! *LINK*

#13

Re: Got the leather on ebay

Greg B�tit Crown Point NY

>Alan,

Thanks! I sent them a question about the thickness- I could use some thinner stuff, but I want to have some guarantee that there will be enough 16 oz stuff for the leg vise.

Thanks again,

greg

Re: Emmert Horse is functioning! *LINK*

#14

I have to tell you about their customer service...

Alan DuBoff

>Greg,

When I first ordered the leather, I asked if there was a way to get a piece that was large enough for my twin-screw. That was fallen on deaf ears, as they say...sent another message asking them the same, and if I could combine shipping on multiple items as stated on their web page.

Finally after sending paypal, paying the full amount for shipping of 2 items, I was contacted on the phone by the owner, and he was not very friendly, IMO. He told me the sizes are what they are and they don't accommodate any special sizes on the scraps. I was ok with that as I told him, no reason to get nasty with me. He was ranting on about how they sell thousands of orders on ebay and don't have time to pick out for a person, blah-blah-blah...

They did ship it out, didn't combine the shipping, but the box was big...so be it...no gripes from me. The product was excellent, IMO, and most of it is very close to 16oz. If you want 16oz, hard to beat the price if the sizes will work as you will most likely spend about $160 to Tandy for a piece of 16oz veg tanned, you will need to buy about 25 - 30 sq.ft. I noted in my feedback that the product was Xlnt if you can tolerate the customer service, and the owner gave me a good feedback and noted the fact. I was happy with the product and in the end I'm willing to tolerate poor customer service for getting the quality product they sent.

This stuff can be seamed just fine, but whole pieces are preferred, IMO. The other 7 oz shoulder I got from Tandy is quite good leather also, and the price was right, it only cost me about $30 also. Got me a piece that was larger than 36" x 24" of nice quality veg. tanned leather.

Re: Emmert Horse is functioning! *LINK*

#15

NICE handle!

Bill Houghton, Sebastopol, CA

>Very pretty, Alan.

Re: Emmert Horse is functioning! *LINK*

#16

Re: I have to tell you about their customer servic

Greg B�tit, Vergennes VT

>Alann,

Thanks for the heads up. I sent them a question asking if I could count on getting some 16 Oz. stuff. Based on your input it sounds like I'll have to take my chances or take a pass on bidding.

greg

Re: Emmert Horse is functioning! *LINK*

#17

You should be ok on the thickness, IME!

Alan DuBoff

>I think you should be ok on the thickness, if my order was anything to gage by. It was only when I asked about the sizes that they got kinda snippy.

Actually, to be fair, I sent a message (3rd or 4th after getting no answer) and mentioned that if I didn't hear from them I would need to contact ebay, so that could be why the owner contacted me. They did take care of things, and the quality of the product was good. I doubt you'll find cheaper 16oz that is usable for that price, unless someone is dumping it...too bad you're not closer, I'd give you some. I wouldn't have a problem getting more from them myself.

Re: Emmert Horse is functioning! *LINK*

#18

Re: I have to tell you about their customer servic

Brad in Ottawa

>We have a local Tandy that I went to when I needed leather to line my vise. A clerk directed me to the scrap bin. Luck of the draw but the scrap bin had several pieces that were more than large enough. Can't remember how much it cost but it cost less than $20 and I probably have a lifetime supply of leather left over.

Brad

Re: Emmert Horse is functioning! *LINK*

#19

What words do you say...

Stephen Shepherd in the State of Deseret

>when a sharp tool edge comes in contact with that huge iron target?

Stephen

Re: Emmert Horse is functioning! *LINK*

#20

Re: What words do you say...

Hank Knight

>How about "Oh fudge!" ;)

Re: Emmert Horse is functioning! *LINK*

#21

Hank, somehow I rather doubt it. ;~)

Todd O. Cronkhite Maine Native, Presently Away

>