Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

stopped dado

Posts

stopped dado

#1

stopped dado

Dean Lapinel

>I have to make this angled stopped dado.

First thought was drill at the stop to allow for angled saw cuts. Chisel waste and side walls the clean up stop. Use router plane to clean floor then slick chisel to clean that acute angle.

My second thought was then to ask you folks if there is a better approach :)


img

Re: stopped dado

#2

Re: third approach...

paul womack

>...alter your design not to need this difficult cut!

Unless you like challenges for their own sake.

BugBear

Re: stopped dado

#3

Re: stopped dado

Stephen Shepherd in the State of Deseret

>Dean,

Sounds similar to a stopped sliding dovetail joint. Drill the stop hole to depth, saw each cheek of the dado at the proper angle and clean up with a hor-la-toot. I don't understand the need for a slick unless this dado is a couple inches deep.

Stephen

Re: stopped dado

#4

Re: third approach...

Dean Lapinel

>LOL!

I wouldn't have designed it that way but then I'm not as brilliant as the designer of this piece that I'm making. :)

Re: stopped dado

#5

Re: stopped dado

Dean Lapinel

>Thanks Stephen!

I didn't think about the fact that the "hor-la-toot" could get that angle (on the right of the diagram) simply by changing the angle of attack. I'm glad I got the rest of the sequence right :)

Dean

Re: stopped dado

#6

hor-la-toot?????

John Pappas

>

Re: stopped dado

#7

old woman's tooth/router plane

Dean Lapinel

>