Wenzloff halfback saw
Derek Cohen (in Perth, Australia)
>I thought I'd share the pleasure I had today crosscutting a board with a new saw from Mike.
Construction details:
No. 8 Half-Back Saw
18" blade length
.030" steel
12 ppi ***high fleam / rake angle***
Cross Cut
Slotted Brass Back
Australian Blackwood handle
This was a birthday present from my wife ... for last year! Which is why I wound up with two presents this year! (It's OK Mike - just a little tease. It was worth the wait).
I was crosscutting a 13" wide Jarrah panel, along a knife line. The saw cut this hard wood like a knife through butter, and tracked beautifully. Here are a few images of its progress ...
Three quarters the way and tracking the line ...
Nearing the end, and still there ...
Image of the remaining line ...
Thanks Mike for a saw that is both beautiful in looks and performance.
Regards from Perth
Derek
Re: Wenzloff halfback saw
#2Nice pictures, but a question
Bill Houghton, Sebastopol, CA
>not entirely a serious question...
From what I can see, the brass back on these saws is for considerably less than half the length of the blade. Wouldn't they more properly be called quarterback saws?
Lovely saws, I have to say, regardless of the name.
Re: Wenzloff halfback saw
#3Re: Wenzloff halfback saw
steve mackay
>Slick right out of the box or did you have to goof with it ? Mr. W sure is good at that. When I get rich & famous I want his half back. Dream, dream, dream . . .
Re: Wenzloff halfback saw
#4Re: Wenzloff halfback saw
Derek Cohen (in Perth, Australia)
>Hi Steve
This was cutting straight out of the box. Mike tunes all his saws ready for use.
Regards from Perth
Derek
Re: Wenzloff halfback saw
#5Sweet ! . . .
steve mackay
>Yes, they are works of art. He was kind enough to lend me some guidance on building my stair saw but for the half back I think I'll let him do the work also !
Re: Wenzloff halfback saw
#6That's a beauty!
Alan DuBoff
>
Re: Wenzloff halfback saw
#7Re: That's a beauty!
Todd O. Cronkhite Maine Native, Presently Away
>...and Happy B-day! I bet now that the year long wait seemed to be well worth it eh? So what other goodie did you get, you said you got two this year. Anderson plane perhaps? ;~)
Interesting tooth design on the saw, what's it called?
T.O.
Re: Wenzloff halfback saw
#8Re: Wenzloff halfback saw
ThomD
>Nice saw!
Was there some reason for scribing a line then cutting inside it? Like were you after the short piece?
Re: Wenzloff halfback saw
#9Re: Wenzloff halfback saw
Derek Cohen (in Perth, Australia)
>Hi Thom
Oooh you have keen eyes!! :)
I hit the line about 2" from the end. This can only be down to my marking out. Well .. a 12" Starrett combination square only has a usable length of about 10" and so I did mark the line from both sides of two boards that were jointed and glued together. The chances of a perfectly straight line were not high. Still, I got close - 1/64" is not too bad over a length of 13". The edge was finished with a plane.
Definitely not the saws fault. That is one sweet tool.
Regards from Perth
Derek
Re: Wenzloff halfback saw
#10Why?
Warren in Lancaster, PA
>Why would anyone want a saw like this? If a guy like me who has been cutting stuff this way for many years can't imagine a purpose, I'm sure there are others equally in the dark.
Re: Wenzloff halfback saw
#11Re: Why?
Derek Cohen (in Perth, Australia)
>Hi Warren
This is a saw that is ideal for crosscuts at a workbench when there is a limitation imposed by its placement against a wall (as mine is).
18" is the safe cutting distance. My other crosscut panel saws are 22" long, which is a common length for these saws.
This halfback saw is also longer and lighter than my longest backsaw that is filed 12 ppi (My Nurse 14" is filed 11 ppi). Backsaws, in any event, have a limited depth of cut. So, best of all worlds.
Mike makes these in different lengths. As I noted, 18" was suited to working across my bench.
Regards from Perth
Derek
Re: Wenzloff halfback saw
#12Amen ! . . .
steve mackay
>I've got, about 23 inches of bench depth. Choped off a big Disston to 18 inches. But I ain't got that sexy brass back !
Re: Wenzloff halfback saw
#13Re: Wenzloff halfback saw
ThomD
>"Oooh you have keen eyes!! :)"
You have a perceptive brain and can see right through me! :)
Nice saw, for a deserving soul.



