Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Made me some marking knives

Posts

Made me some marking knives

#1

Made me some marking knives

Rich Glisson

>I got a mini lathe for my birthday earlier this month, in part because I like making and retoring tools and have been frustrated by not being able to turn handles for them. I saw the marking knives Dominic Greco posted here on 2/11 and that inspired me to make a couple for my first turning project...thanks for the inspiration, Dominic!

I used cocobolo and made the ferrules out of brass tubing fittings. The blade for the small knife was made from a worn-out Bosch jigsaw blade, and the blade for the larger one was made from a defunct 6" jointer blade. The blades were shaped free-hand using my stationary belt sander, a grinding wheel, and a Dremel with various grinding stones, then polished with 600-1500 wet/dry sandpaper and Mother's mag polish. The little brass pieces ("sub-ferrules"?) projecting from the ferrules were made from 1/4" brass rod (I inserted the brass stock in a hole drilled in the end of a block of wood and ran the block through a bandsaw to split the brass in half lengthwise). The blades are jammed tight in 1/4" holes bored in the knife handles, and epoxied with JB Weld. The cocobolo polished up beautifully on the lathe, but I added a very thin coat of tung oil varnish for good measure, followed by wax.

I made the smaller knife first, and after trying it out realized that it is important to keep the blade short on this kind of marking knife so it can be grasped like a pencil. As a result I made the ferrule and blade shorter on the bigger knife. I don't think it is so critical for the small knife, as it can be held almost like an artist's paintbrush when marking dovetails, etc. Also, I realize that a round profile on a marking knife is not a great idea, but can't bring myself to grind flats on them. Maybe after they hit the floor a few times!

Thanks for your interest!


img

Re: Made me some marking knives

#2

Another pic 

Rich Glisson

>


img

Re: Made me some marking knives

#3

Re: Beautiful and nicely photographed

Dave Mount

>

Re: Made me some marking knives

#4

Well done Rich!

Scott Burr in Ben Lomond CA

>I like the looks of both the ferrules. Nice and shapley curves too.

Mother mag polish? Do you use that to strop with?

Again, fine job.

Re: Made me some marking knives

#5

Re: Made me some marking knives

Marv....... Northern California Lake Co.

>Very very nice wood/metal work. Always nice to see the two skills working beautifully together.

Marv

Re: Made me some marking knives

#6

Opportunity knocks.......

Bill Tindall, E.TN

>I have been wanting to make some knives like the small one and mounted as you have it. What stymied my efforts was not knowing how to mount the blade. The details are still not clear to me in spite of your extensive description. Is the 1/4" brass part sawed into two separate pieces or just a slot in the rod? How long is it and how deep is it into the wood? I presume there is a 1/4" x ?" long tang ground on the blade part? A cross section drawing of the blade mount would be helpful.

Re: Made me some marking knives

#8

Ellis Walentine

Toolmaking contest! *LINK*

Ellis Walentine

>Lovely work. I hope you are planning on entering the toolmaking contest, with these or other shopmade tools. The entries are starting to come in more quickly as the deadline approaches.

I urge you all to enter.

Ellis


Toolmaking Contest - Deadline March 15

Re: Made me some marking knives

#9

Re: Opportunity knocks.......

Rich Glisson

>Howdy Bill. Those little brass pieces may support the blade a bit, but for this application they mostly are there just to plug the crescent-shaped gaps in the end of the ferrule that are present after inserting the blade into the handle. They are about an inch long, so about 3/4" is buried in the handle. I completly split the 1/4" brass rod into 2 pieces and sanded the flat sides until they were just the right thickness (did it mostly on the belt sander...burned fingers, anyone?). Cutting a slot just the right width to accommodate the blade is probably not practical unless you have machine shop access, as the blade's tang is about 1 1/2" long and the slot should be nice and smooth--smoother than you'd get with a bandsaw or hacksaw.

Re: Made me some marking knives

#10

darn you guys!

Bill Tindall, E.TN

>Now that you have shown me how easy it is to fix the blade in the handle I have put this project up near the top of my seemingly endless list of shop projects, and the list grows ever longer- marking knife, some small squares, doors for laundry room, closet doors, den book case doors, a desk, Federal side cabinet, etc..........And gardening season is but a month away.

Re: Made me some marking knives

#11

Submitted my entry

Bill Houghton, Sebastopol, CA

>though it's certainly on the other end of the continuum from those lovely knives.