Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Wall mounted corner tool til - proof of concept

Posts

Wall mounted corner tool til - proof of concept

#1

Wall mounted corner tool til - proof of concept

Paul Erickson

>Well, the idea is still in the prototype stage, with a number of refinements to make, but in terms of trying to make maximum use of available space this seems to be a step in the right direction.

The lowest shelf will support a drawer,and there will be another one or two below that.

Any suggestions will be welcome.

cheers, Paul


img

Re: Wall mounted corner tool til - proof of concept

#2

Re: Wall mounted corner tool til - proof of concep

Paul Erickson

>Here is another slightly different angle. I forgot to mention, the upper support for the leaning planes is one of the corners I had cut off the lower shelves. I plan to put another one in the space behind the leaning planes, and possibly another one above the current top support.

Now I have to figure out how to best use the rest of the wall space available there.

cheers, Paul


img

Re: Wall mounted corner tool til - proof of concept

#3

Six Workers

Warren in Lancaster, PA

>I think that if you have half a dozen workers in your shop, it might be better to spread out the storage so they don't all have to go to the same corner for a plane.

Re: Wall mounted corner tool til - proof of concept

#4

Re: Six Workers

Paul Erickson

>Hi Warren, thanks for the response. Getting 6 workers in a 200 sq ft shop might be a bit of a challenge...!-)

cheers, Paul

Re: Wall mounted corner tool til - proof of concept

#5

Jack Guzman from Maine

Re: Wall mounted corner tool til - proof of concep

Jack Guzman from Maine

>Hello Paul,

Correct me if I'm wrong,but I'm assuming that you don't use all of those planes all of the time. If that is the case,I would arrange the planes you grab for most often in that wall case and put the rest into a somewhat less accessable storage like a floor chest.That way you'd have room for more other kinds of tools in the cabinet.---Jack

Re: Wall mounted corner tool til - proof of concept

#6

Re: Wall mounted corner tool til - proof of concep

Paul Erickson

>Hi Jack,

Thanks for the response. The til is still a work in progress, and I will be expanding the wings, if you will, to accomodate other tools. This will also not be the only til in the shop. My shop is pretty small, and if I were to move the "extra" planes so some other place, that would mean that that place was not available for storing other things. Obviously this is a bit too crowded, at present, but I think adding another shelf will solve that. I'm trying to decide whether to go high or low with it. The object of this exercise was to try to maximize the use of the available cubic footage ie. how many people can you stuff into a VW bug, and still drive down the road (I was part of a 9 person effort that went from San Jose to San Francisco...!-) I will also be thinning out the collection a bit, and that will help also... Anyone looking for a Union No 8 with a Hock blade, or a No. 7c???

Thanks again for the time and attention.

cheers, Paul

Re: Wall mounted corner tool til - proof of concept

#7

Hmmm, Some looks like a...

Scott Burr in Ben Lomond CA

>Collector, Ahhhh!

All kidding aside Paul, Nice prototype design. Please show us more as it progresses.

Re: Wall mounted corner tool til - proof of concept

#8

Re: Wall mounted corner tool til - proof of concep

Bruce, a MN Galoot

>A corner is a hard space to use without wasting a bunch of space, but I think you've developed a good solution. You seem to have about the same number of planes that I do, and I wouldn't be a bit surprised to see a copy gracing the corner of a certain shop in south central Minnesota pretty soon. Thanks for posting.

Bruce

Re: Wall mounted corner tool til - proof of concept

#9

Perhaps a Lazy Susan?

Thomas Skaggs, Foothills of Mount Level

>Looks like your prototype generally works. But it looks pretty full with no room for any more tools. I'd be concerned about clinking planes together as you try to fit them into those tight spaces.

What about a 3 tiered Lazy Susan? Much like you see in the corner of a run of kitchen cabinet. It could be open if you'd like or partially enclosed. Just turn it to the planes you desire to use. Just use some metal pipe, some flanges and plywood would be the basic materials. Just a thought.

Tom

Re: Wall mounted corner tool til - proof of concept

#10

One suggestion

Bill Houghton, Sebastopol, CA

>If you ever move to earthquake country, don't bother to remove that till from the wall to bring with you. The long planes would probably not survive a 4.5 quake.

Unless, of course (shut your eyes, Scott Burr), you've got magnets in the shelves...

Re: Wall mounted corner tool til - proof of concept

#11

Magnets we don't need no stinking magnets...

Scott Burr in Ben Lomond CA

>I don't think they would help in a 4.5 quake. Can you sail planes!

Re: Wall mounted corner tool til - proof of concept

#12

What???! *LINK*

Rob Lee

>You could use THESE magnets to store your planes....

Cheers -

Rob


Magnetic Belt

Re: Wall mounted corner tool til - proof of concept

#13

Amlost forgot that one! Wonder what's comming...

Scott Burr in Ben Lomond CA

>This year. Your running out of development time Rob...

Re: Wall mounted corner tool til - proof of concept

#14

ROFLMAO

Stephen Shepherd in the State of Deseret

>

Re: Wall mounted corner tool til - proof of concept

#15

Re: Magnets we don't need no stinking magnets...

Marv....... Northern California Lake Co.

>Magnets always work....just get bigger ones...

Marv

Re: Wall mounted corner tool til - proof of concept

#16

Re: Perhaps a Lazy Susan?

Paul Erickson

>Hi Tom,

Thanks for the thought. Having recently put lazy susans in our kitchen cabinets, I find that they are convenient, but not a particularly efficient use of space. You lose the ability to store things in the corners. Having said that, you are right about the current model being too crowded. This section is intended for my planes. I will be adding other elements to store other types of tools. I am also planning provisions for minimizing planes bumping into each other.

Thanks for the time and attention.

cheers, Paul

Re: Wall mounted corner tool til - proof of concept

#17

Re: Wall mounted corner tool til - proof of concep

Paul Erickson

>Very glad to be of help. I'll be interested in seeing your's when it is done.

cheers, Paul

Re: Wall mounted corner tool til - proof of concept

#18

Re: What???! Harmful product?

Cooper Suter

>Had a friend once who had a concern regarding microwave ovens and their possible effect on his fertility and male "genetic" matter. Not something he ever brought up on his own, but another friend noticed him acting strange in the kitchen when some popcorn was being made. When questioned he explained his reason for always circumnavigating a running microwave and orienting his genitals away from it. You might want to explore the long term health consequences hanging 500#'s of magnetic force at that elevation. Next April 1st I see a wave of product liability cases headed your way.

Also, as shown, I'd expect a fella to quickly learn to retract the plane iron fully before hanging a plane in certain areas, or consider the old shop rule of always laying a plane on its side so as not to "dull one's cutter".;)

Re: Wall mounted corner tool til - proof of concept

#19

It'd be easy to keep track of your kids, though

Bill Houghton, Sebastopol, CA

>If your DNA got magentized before you had your kids, you could later just stick them to the nearest metal surface when you had to step out of the room, and they'd be right there when you got back.

As I think about it, though, that may already be happening; it would certainly explain why teenagers are always stuck to refrigerator doors.