Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Deneb Puchalski - LN Toolworks on sharpening!

Posts

Deneb Puchalski - LN Toolworks on sharpening!

#1

Deneb Puchalski - LN Toolworks on sharpening!

Alan DuBoff

>DISCLAIMER: I am not a professional camera man, and there is a lot of noise and some might think to complain about lighting. There is a lot of work going on during the day at the Crucible where the show was at, so keep that in mind. With that said, I am confident that these videos should be worth what I am charging you for my time to take the video and publish it on YouTube. Hopefully some of you might find this useful. I have some other videos, and I can convert if anyone is interested. The most notable is Deneb Puchalski flattening a workbench top, and I have some footage of Steve Latta on inlay. Steve gave me one of the legs he was working on over the 2 days of the show, and I will take some pics of it when I get some time.

Part 1


Part 2


Part 3


Part 4


Re: Deneb Puchalski - LN Toolworks on sharpening!

#2

Re: Deneb Puchalski - LN Toolworks on sharpening!

Stephen Shepherd in the State of Deseret

>Wow, you can play all of the video clips at one time, sounded like there were a dozen people in my room.

Stephen

Re: Deneb Puchalski - LN Toolworks on sharpening!

#3

Yes, computers let you hang yourself!

Alan DuBoff

>Stephen,

Again, my appologies, it would be better to have 1 continuous video, but YouTube only allows 5 minutes. And it takes time to edit, segment it out, and such, so it is what it is...;-)

Chris Schwarz spoke of his upcoming article in the at press issue of Woodworking Magazine, every galoot's fave pub, IMO. He touched upon different class cuts, as used by the English and how they relate to the type of joinery we perform. Very interesting topic that I am interested in a lot.

I have a swell picture of Chris with his pirate patch on, and sportin' a Wenzloff sash saw. Quite the trend setter, if you ask me...*wink* As Rodney Rude says down under, 'ya Trend Settin' Fa.....oops, better not say that here in mixed company...:-/

Take a gander...I think 'yall will agree!


img

Re: Deneb Puchalski - LN Toolworks on sharpening!

#4

Re: Yes, computers let you hang yourself!

Stephen Shepherd in the State of Deseret

>In the first one when he got to the micro bevel and ruler trick, I lost interest and started pushing buttons, then got them all going at once, then it began to make perfect sense. Nod, nod, wink, wink.

Computer is just fine.

Stephen

Re: Deneb Puchalski - LN Toolworks on sharpening!

#5

Your computer is most certainly fine...

Alan DuBoff

>Stephen,

I am certain that your computer is fine, and as a person who works on these beasts for a living, this is all the be expected. Depending on the operator providing input, you only have the intelligence of that operator. This is never a fault of the computer itself, but the operator in most all cases!;-)

I merely suggested that the computer will allow you to hang yourself, not that it filters input.*gd&r*

Somehow I suspect this was not provided for folks like yourself, but could be wrong. In the meantime please feel free to catch a few winks!*wink* (pun intenional, please consider this to be yet another wink which was caught.;-)

Re: Deneb Puchalski - LN Toolworks on sharpening!

#7

Oh, forgot to mention, free ruler trick giveaways!

Alan DuBoff

>Stephen wrote:

"In the first one when he got to the micro bevel and ruler trick"

Speaking of the ruler trick, Lie-Nielsen was giving away free rulers at the counter. It was an item that was actually free, which most people probably didn't know as they didn't advertise it as such.*wink* (there's another wink for 'ya;-)

I thought that was a pretty good giveaway in itself! Probably not worth the gas it took to drive up there, but just an extra added touch which TLN provides to the woodworking community, that is actually useful, IMO.

Re: Deneb Puchalski - LN Toolworks on sharpening!

#8

Re: Deneb Puchalski - LN Toolworks on sharpening!

Mark Salomon

>Thanks Alan. While you were filming this I was over on the other side watching Steve Latta make the inlaying process (and L-N's new tools) look easy. Chris S. was there with his lovely wife Lucy autographing his books and giving advice--he followed with a great one hour lecture on workbenches. It was a nice compliment to his book and it was a good opportunity to ask questions. Thanks to L-N for a fine event and a nice chance to fondle their tools (and buy a couple also!). In addition to the above, Ron Hock, Glen-Drake, and Bridge City was there answering questions and demonstrating wares.

Re: Deneb Puchalski - LN Toolworks on sharpening!

#9

Workbench flattening please

dcockey

>I'd like to see the workbench flattening. Thanks.

Re: Deneb Puchalski - LN Toolworks on sharpening!

#10

LN Toolworks at the Crucible

GregB

>Thanks, Alan. I was there too and thoroughly enjoyed the experience.

Tom has always been a truly great guy and it's fun to play with the full array of his tools. I've always been a traditional bevel down guy, but the opportunity to test/play makes me think the low angle, adjustable mouth jointer will be next to join the shop.

It makes me happy to see that sparkle in Tom's eye, as it indicates he's still having a blast and probably has yet another cool tool up his sleeve. Makes me want to get back in the shop again.

Chris was interesting and gracious. Steve and his wife are real people and his work, done steadily as he talked with everyone, is superb. I hope they got a chance to visit Muir Woods again.... Kevin Glen-Drake is as nice and intense as ever and Ron Hock is the same great guy too. Their tools are wonderful.

If anyone receives a post card announcing a similar show in their neck of the woods, it's worth going to.

Cheers,

Greg

Re: Deneb Puchalski - LN Toolworks on sharpening!

#11

Re: Deneb Puchalski - LN Toolworks on sharpening!

Eric in Los Gatos

>It was a great little show. I got to hear Chris' talk on workbench philosophy and received so great advice on how to manage my problem child Stanley 12 scraper. Had my humbling moment with Chris when I told him that I (a mechanical engineer for cryin' out loud) couldn't figure out why the cutting depth increased as the angle of the blade increased. I was sure it should work the other way in spite of my emperical evidence. He just looked at me and without any time to consider my comment said "that's because the pivot point is behind the blade". DOH! What really impressed me in retrospect was that he didn't even have to think about it. That obscure tidbit was right there for him.

But before you think I'm idol worshiping him he wasn't smart enough to bring enough of his books. He was out on Saturday afternoon. Now I have to order it and wait.

All in all a small show made great by the people there.

Eric in Los Gatos

Re: Deneb Puchalski - LN Toolworks on sharpening!

#12

Not sure I will post it...

Alan DuBoff

>I have the video converted to one large quicktime, it's about 50 minutes long and would require 10 parts.

The audio is not very good either, so I'm not sure what to do with it, and until I think of something better than breaking it down into 10 x 5 minute sections, I'm not sure it makes sense.

The other video footage of Steve Latta is shorter and would make a great short clip, I think, but haven't converted it yet.