Sheppach sharpener
john lucas
>I picked up one of these for $100. I have a question for those who have something similar, Tormek, Jet, Grizzly. When I sharpen my smoothing plane blades I have always pushed down on the corners to the a slight curve to the blade. I've only started to sharpen one blade on this thing and it doesn't feel like it rocks any. I guess I'll be able to tell more when I get to finish the process I just thought I would rough it out to find out if there was any deep pitting in the rust on this blade. I'm restoring an older wooden smoothing plane and just started on the blade.
Anyway my question is can you get a slight curve to the edges using this or should I use it to rough out the edge and then go back to my scary sharp method for finishing the blade.



