Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Wall mounted corner tool til?

Posts

Wall mounted corner tool til?

#1

Wall mounted corner tool til?

Paul Erickson

>Has anyone built/designed a, wall mounted, corner tool til? I plan to have two benches along two intersecting walls, and would like to build a tool til between them. I have some ideas, but would appreciate hearing from anyone else who might have done this.

Thanks in advance.

cheers, Paul

Re: Wall mounted corner tool til?

#2

Re: Wall mounted corner tool til Warning!

Stephen Shepherd in the State of Deseret

>Warning, Warning, you will build your till no matter what size too small! I waited for 30 years to build one and the moment it was complete it was not big enough for my tools.

Have extra space for tools you can't resist buying, more slots for chisels, extra spaces for saws, extra drawers, you will need them.

Don't feel bad if your big new cabinet is not immediately full of tools, it will be soon, then alas it will be too small.

Consider making more than one, making it smaller then adding another one as needed.

Stephen

Re: Wall mounted corner tool til?

#3

Re: Wall mounted corner tool til Warning!

patrick gibbons, houston, tx

>I like multiple stations also.

Re: Wall mounted corner tool til?

#4

Re: Wall mounted corner tool til Warning!

Kevin French, Antrim, NH

>Paul, what Stephen says is true. My saw and plane tills are full, and almost as soon as they were built, BUT I built them big enough for what I NEED. I just rotate out the tools as I find better ones.

My Saw Till hold 40 total and has room for 14 full size western saws, another half dozen shorter saws and Back Saws, a half dozen pullsaws, another half dozen Gent size saws and Coping saws hanging in the corners.

My Plane Till has space for 30.

That's MORE then enough users for any one WW'r. Unless of course your a collector.

Re: Wall mounted corner tool til?

#5

Re: Wall mounted corner tool til Warning!

Paul Erickson

>Thanks guys, Already with you. This will not be the only tood storage in the shop, but the place where I reach for the tools used most often. Your point is very well taken, and already in the plan, now back to the original issue... Has anyone built one that tries to take full advantage of a corner? The intent of all of this is to try to make as efficient use of a small space as possible.

cheers, Paul

Re: Wall mounted corner tool til?

#6

Re: Wall mounted corner tool til Warning!

Tim Caley - North Litttle Rock

>What not take a cue from the kitchen designers and put some kind of a turntable assembly in the corner?

Re: Wall mounted corner tool til?

#7

KEVIN!

Scott Burr in Ben Lomond CA

>Bite your tongue

"That's MORE then enough users for any one WW'r. Unless of course your a collector"

HA HA HA (evil laugh)NEVER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Re: Wall mounted corner tool til?

#8

Just a second, here, Kevin

Bill Houghton, Sebastopol, CA

>You're storing there only what you need - you need 40 saws? Seems like that'd be 3-4 saws for each wood species you're likely working. Now, THAT's refinement in tool use.

Re: Wall mounted corner tool til?

#9

Some people need more...

Kevin French, Antrim, NH

>Bill, I have 6 Mitre Boxes so you have to have a saw for each. The '40' number also includes a bunch of odd coping saws, Hack saws ... I've got a nice collection of most of the common types of saws.

Just did a count and there is 40 in the till, another 10 strategically positioned around the shop and two tool boxes of the 'Mutts'.

I don't use them all, or try too, and you know I didn't buy most of them.

Re: Wall mounted corner tool til?

#10

look at the Blum Kitchen corner drawer *LINK*

Ian in Sydney

>this kitchen corner drawer looks as though it may have possibilities


img

link to Blum kitchen pages