Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Nicholson 50, 49, 48, 47.... ?

Posts

Nicholson 50, 49, 48, 47.... ?

#1

Nicholson 50, 49, 48, 47.... ?

Scott in Montana

>While shaving away with my wood rasp tonight I was thinking that there used to be additional rasps in the Nicholson line. Anyone know what they were and where they went? I came up with nothing when I did an internet search. Maybe I'm just imaging reading something about them long ago. I do that now and then. :O)

Scott

Re: Nicholson 50, 49, 48, 47.... ?

#2

There was a 4-in-1

Alan DuBoff

>Nicholson also made a 4-in-1, and I think may have made 2 sizes, small and large, I definitely have 1 of the, but can't remember if I have 2 different sizes. I use the 49 and 50 the most.

Re: Nicholson 50, 49, 48, 47.... ?

#3

Re: There was a 4-in-1

Scott in Montana

>That's right, there was a 4 in 1, in fact I have one somewhere. I was thinking that there were additional forming rasps with more aggressive teeth. Thought I read where the 49 and 50 were the second cuts of the series. But you'd think that if there were such files that you'd see one or two on eBay at some ridiculous price due to their rarity.

Thanks for the reply,

Scott

Re: Nicholson 50, 49, 48, 47.... ?

#4

Re: Nicholson 50, 49, 48, 47.... ?

Peter Evans

>Scott, the Nicholson rasp range, at its peak was, as follows in increasing order of smoothness:

Wood Rasp - Smooth, Bastard [1/2 round, round, and flat] 6" to 16"

Cabinet Rasp - Smooth, 2nd cut [available in 1/2 round, and round] 6" to 14"

The above have no reference numbers.

Last makers (uncut edges), Pattern makers (cut edges) - 2nd cut, smooth

These rasps are basically the same except for the edge.

The numbers are:

Last makers cabinet rasps - 1, 3, 4, 6, 7, 9, 10 [8" to 10"]

Pattern makers cabinet rasps - 40, 41, 43, 44, 46, 47, 49, 50, 51, 52, 53 [6" to 12"]

Pattern makers 1/2 round rasps - 54 [8 3/4" x 1/2"], 55 [10" x 3/4"] 2nd cut. Unfortunately no illustration of this rasp, so do not know the shape of point.

The Gramercy rasp, to quote website "The shortest of the rasps is only 5" long (working length) and is inspired by the long-gone Nicholson 55 - except ours is hand cut." And at 25tpi would probably be categorised as smooth. I have one, very nice.

Note that cabinet rasps have a fairly flat arc (check your #50), 1/2 round is well more round. The shapes are pictured below.

The numbers relate to:

cut - 2nd or smooth

length - 6" to 12".

narrow or wide point [#49, #50 are narrow point]

There are also cabinet files and last makers files.

Trust that gives you enough to go on. Thanks to Gary Roberts for the catalogue info.

Cheers, Peter in Sydney


img

Re: Nicholson 50, 49, 48, 47.... ?

#5

WOW! Everyone should read Peter's post.

Scott in Montana

>Thank you for the information Peter. I knew that many if not all of the file series had a bastard, 2nd cut, and smooth models, and was thinking there might be a third file to the #49 and 359. But I had never seen anything on the other vintage files.

Isn't it funny that these old rasps and files don't turn up on eBay?

Thanks again for taking time to post all of your knowledge.

Scott

Re: Nicholson 50, 49, 48, 47.... ?

#6

Re: WOW! Everyone should read Peter's post.

Peter Evans

>Scott, I did see a NOS #54 on eBay a couple of years ago, went way high past my limit

Cheers

Re: Nicholson 50, 49, 48, 47.... ?

#7

At my local hardware store, *LINK*

Scott Burr in Ben Lomond CA

>They have a Nicholson rasp thats much corser than a 49. It has no number on it.

Nicholson is a divison of Cooper Ind. here's their website.


Current offerings