Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Sand'n the sole . . .

Posts

Sand'n the sole . . .

#1

Sand'n the sole . . .

steve mackay

>OK, since I never used the bench sander to get out those pesky pits I've never asked THIS question. I grabbed hold of the body ( yes, I let it cool first ) but 'bout cut my paws on the length-wise corners of the sole. That whisper of sharp edges on flesh. Should these edges be eased off a bit or is it desirable on a " well-tuned " plane ?

Re: Sand'n the sole . . .

#2

It's best to ease them...

Scott Burr in somewhat warn Ben Lomond, CA

>Just take a file, stone or sandpaper to it. The blade does the planning not the sole;^)

Re: Sand'n the sole . . .

#3

Just barely break the edges

Stephen Shepherd in the State of Deseret

>You still want a crisp edge as it will help keep dust and shavings from going under the planes sole. Not sharp enough to cut your fingers.

Stephen