Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Millers Falls

Posts

Millers Falls

#1

Millers Falls

tek-Brunswick, Ohio

>I was going through sum tools that came from a house sale. I found a box of plane blades. They in a Millers Falls box Two blades are Millers Falls and two are Stanley. They are the right size for my #7 and # 4 1/2 Stanley planes. The Millers Falls blades are a little thicker than the Stanley blades. That would make them a better choice to use if the steel in the Millers Falls blades is as good as or better than the Stanley Steel. The Millers Falls Blades are stamped with the words solid tool steel. Do any of you know how these blades compare. Of course none of them are Hock A2 steel, but I plan to hone them all , so I can just switch blades when one goes dull in the middle on a project.

Re: Millers Falls

#2

Millers Falls blades are just fine

patrick gibbons, houston, tx

>

Re: Millers Falls

#3

Ya got it all wrong...

Scott Burr in Ben Lomond CA

>"so I can just switch blades when one goes dull in the middle on a project"

No No No, You need to get 3 other planes to put them in. It's far easier to just grab another plane then to take the time to swap out and reset a fresh blade.

8^)