Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Shameless Plug

Posts

Shameless Plug

#1

Shameless Plug

James Watriss

>For anyone in the Boston area...

There's been a lot of talk in here lately about spokeshaves and drawknives. For anyone with the time and inclination, I'm teaching a class on building wooden spokeshaves this Saturday at the Woburn Woodcraft from 10-4.

Re: Shameless Plug

#2

I need a little more notice...

Stephen Shepherd in the State of Deseret

>as it takes 3 or 4 days by train, sorry I will miss it.

Stephen

Re: Shameless Plug

#3

Shameless Plug, reinforced

Bill Tindall, E.TN

>James, Email me as I may have deal for you.

These things are easy to build and they work great when a low angle shave is needed. If you don't own one or two, take the class and make some.

They work best on not- straight- grain shaving (that would be more or less end grain), at least in my hands, and addition of "modern" jack screws makes adjusting by mortals practical (easy).

I have come to the conclusion that fretting over the mouth opening is less important than I considered it while making the first ones. What is your opinion? Mine tend to lift splinters on straight long grain even with a tight mouth so I don't use them in these situations.

Re: Shameless Plug

#4

Re: Shameless Plug, reinforced

James Watriss

>"James, Email me as I may have deal for you."

OK, I'm emailing. :)

"These things are easy to build and they work great when a low angle shave is needed. If you don't own one or two, take the class and make some."

Well, I was teaching the class in this case, but it did go very well. It was a decent 6 hour project, and all the students managed to have a functional, and at least partially shaped shave by the end of the class time. And I built one alongside the students to show them what was next, and to take the hit on set-up errors, since we used both hand tools and a router table to do some of the work. So there's a display model sitting somewhere in the Woburn Woodcraft, but the mortise for the blade is too long... set up my plunge and stop blocks wrong on the first one.

"They work best on not- straight- grain shaving (that would be more or less end grain), at least in my hands, and addition of "modern" jack screws makes adjusting by mortals practical (easy)."

Well, we used the Hock high-carbon blades, and I took a page from woodjoy's book and used allen key worm screws to bed the blade. I'm hoping it's not a patented feature. My first shave was years ago and I used brass wood screws instead of machine screws. It was a thorough pain in the ass, both because the thread pitch was too coarse to be easily adjustable, and because I had to remove the blade every time I wanted to make an adjustment. So getting the blade set up just so was an ongoing process of removing the blade, and holding a ruler against a screwdriver to be able to gauge very small degree turns of the screwdriver to adjust the screws just so. And then put the blade back in, and try it all again. So the adjustable from the top screws are a stroke of pure genius. I'll have to email the woodjoy guy and see if I'm out of line. He makes amazing spokeshaves, and I really don't want to step on his toes. Or better yet than email... go visit. I think he's in Swansea, MA, so it's not too far away.

"I have come to the conclusion that fretting over the mouth opening is less important than I considered it while making the first ones. What is your opinion? Mine tend to lift splinters on straight long grain even with a tight mouth so I don't use them in these situations."

I tend to agree, to a point. I think the shape of the blade and the way it gets tuned has more to do with the usability of the shave. I don't have too much problem on long grain, but one of the features I included was something I found in Charlesworth's first book. He mentions that it helps to include a very slight (2 or 3 degree) bevel in the front helps the blade to engage. I think this is a really important thing. I ran the bevel back to roughly 1/16" behind the edge of the blade, so the blade is able to protrude, and engage the wood at a slight angle. The other feature I'm trying to fine-tune is to knife grind the blade, putting a slight rounded microbevel on the back of the blade to make it more steerable through the wood. Wooden spokeshaves are, after all, more like draw knives in operation than they are like wooden shaves... which are more like planes.