Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Big Saws

Posts

Big Saws

#1

Big Saws

Stephen Shepherd in the State of Deseret

>When Stephen Kirk posted the thread below, I thought rather remorsefully of my Big Unbacked Pattern Maker's Saw. It is a copy of one in the Shelbourne Museum, cherry handle, the nuts in the photo were replaced with a couple of nice original spanner bolts after this photo was taken.

I lent it to a museum for an exhibit, and they lost it. It may be somewhere in their collection but after three years, still no sign. I actually used it for all kinds of tasks. It was sharpened in a 'very secret, protected, proprietary, guarded, special combination' pattern that worked well for dovetailing and crosscut.

I am not allowed to divulge just yet this very special saw tooth pattern filing, but it is on the horizon. Stay in touch.

I built the saw because of the handle, it just looked comfortable and it is the finest saw handle pattern I have ever handled, that may be redundant, but at least I am not repeating myself.

The Gnomon (ruler) is 18" long.

Stephen


img

Re: Big Saws

#2

Re: Big Saws

Alan DuBoff

>Beautiful saw.

Funny, I like this style of saw a lot, and have some similar smaller ones, around 12". I am currently making a joinery saw that is 12", with a 14 ppi tooth, but only 1 3/4" of blade depth. Maybe I can finish it for the toolmaker contest.

I have a similar Patterson, c1860s that I am using as a kinda style guide. I have a 12" Disston No 70 which is also similar, a longer pattern maker's type saw. This kinda goes against the admiration towards smaller joinery saws (i.e., an 8" dovetail saw), as longer saws are more difficult for most people to control. I just like the added blade to maximize each stroke. the extra teeth make a difference, and what makes one a big saw.

I think many people have their own theories on saws, but I have grown to like the added length of a 12" joinery saw, as I have grown to prefer just a tad courser tooth for hardwoods. I'm going to use 14 ppi for that reason, in the past I have liked 16 ppi and then 15 ppi seemed to give a slight bite, and 14 ppi seems to feel pretty comfortable...For myself anyway, 14 ppi seems to be a good compromise for me with a joinery saw.

Curious, she is a honey, what's her points size? :-/

I think I would like it with about 12 possibly. I have one 18" backsaw that is 9 ppi, and it's too course for my taste, at least for hardwoods. Yours is interesting as it doesn't have a back, and more similar to the common 6" pattern maker's saws with the open handles (made by various makers) which also didn't have backs. The handle looks nice also, it's big but still looks very comfortable. Thanks for sharing.

Re: Big Saws

#3

If it makes you....

Todd Hughes

>feel any better,...I have two of them ! Found them in an old pattern makers tool chest I bought, looked like he had just put it away and was complete with all his tools still.....Pretty neat saws I always thought......Todd


img

Re: Big Saws

#4

Handle close up

Todd Hughes

>Heres a close up of one of the handles....pretty wild eh?


img

Re: Big Saws

#5

Yeah, I feel a lot better now

Stephen Shepherd in the State of Deseret

>

Re: Big Saws

#6

Re: Yeah, I feel a lot better now

Todd O. Cronkhite Maine Native, Presently Away

>Stephen, I think your fibbin', fibbin', fibbin'! ;~)

I sure hope they find your saw. Boy, I'd be some ticked at them for losing it. That's just pitiful. Tells me that they really don't give a rats arse about their loaners.

Todd, those sure are some beautiful handles on those saws! I'm really blown away by them as a matter of fact. Absolutely curvy and well, Wild. I see a new trend in the sawmakers world.

T.O.

Re: Big Saws

#7

Nice handle, thanks for posting that!

Alan DuBoff

>

Re: Big Saws

#8

Re: Big Saws

paul womack

>I am not allowed to divulge just yet this very special saw tooth pattern filing, but it is on the horizon.

I bet it's in one of my books :-)

BugBear

Re: Big Saws

#9

OK now guys...

Bob Hackett

>You`ve both laid `em on the table and we can now see who`s is bigger.So how about answering some questions about them,things like;

Why did pattern makers use them as opposed to other available conventional type saws?

Why the crazy handles?

What is it about pattern makers that they just can`t be content with the same stuff the rest of the trades had to put up with?

And most importantly;why did they have so much free time on thier hands and where were thier eagle eyed bosses while they were making all this eye candy?

Enquiring minds,yada yada

Mainely,Bob-Who has always been intrigued by pattermaking tools and millwright technique.

Re: Big Saws

#10

A guess on the last question

Bill Houghton, Sebastopol, CA, sunny so far!

>My impression is that, in most trades, there's a social requirement to make some of your tools on lunch hour, bits of time after work, etc. - probably even more so in the 19th century, when the concept of making one's own tools was not quite so far away as it is now (imagine a modern carpenter deciding to make a nailgun on the weekends). The handles on Todd's saw probably represent the competitive spirit coming out in the patternmaker who made them.

Re: Big Saws

#11

I would imagine...

Stephen Shepherd in the State of Deseret

>that these saws were not factory made. They were probably made out of longer wider saws. So if you are making a narrower easier to handle blade from a cabinet or panel saw you need to make the handle. So why not make it fit and look good at the same time.

The reason they are not backed as that would get in the way of cutting square or deep. I think most were sharpened crosscut as patternmakers would use rived wood for stability so a rip would not be necessary. A blade of uniform width can be very helpful for cutting to accurate depths. The narrower blade can also get into tighter areas than saw blades that get wider toward the handle.

Being the only saw associated with patternmakers that I know of, and I am sure they could use others the saw needed to be able to be used for all of their purposes. If you had only one saw, I am sure it would be a nice one.

Stephen