Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Found an O101 in Recent Acquisitions

Posts

Found an O101 in Recent Acquisitions

#1

Found an O101 in Recent Acquisitions

Gary K

>I like the Stanley 101 plane for quick use on small tasks - easing an edge, smoothing a small rough spot, etc. I have an old S-casting Stanley, which has a noticably tighter mouth and gives me a finer cut. Recently, I found an Ohio Tool O101 in an auction box. It has a tight mouth, and also the iron is much thicker than the Stanley iron.

My user is on the right, another Stanley is on the left, and the O101 is in the middle.

Are these tools common enough to be users? If so, what is the quality like?

Regards, Gary K


img

Re: Found an O101 in Recent Acquisitions

#2

Re: Found an O101 in Recent Acquisitions

Neal in San Jose

>The Ohio Tool Co. was a persistent nuisance to Stanley until they went out of business in about 1916. They frequently didn't bother with things like honoring patents, and there is a lot of paperwork from lawsuits and countersuits between the two companies. As such, they are sort of interesting, but their tools are common enough that they don't really command much of a premium over a similar Stanley. Their quality was variable, but mostly on a par with Stanley. Most of my users are Ohios because I like the thick blades - got into these before I discoverd aftermarket blades. Unless your O101 is museum quality with 99% japanning, it is fine putting it back into service. I have a O101 1/2 (I think) with the squirrel tail, and I use it without any guilty feelings!

Re: Found an O101 in Recent Acquisitions

#3

Re: Found an O101 in Recent Acquisitions

Gary K

>Thanks, that's nice to know. The turnscrew slot in the cap screw is a nice touch too.