Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

how high will it go? *LINK*

Posts

how high will it go? *LINK*

#1

how high will it go? *LINK*

old tool guy in san diego

>This plane amazes me.

So simple, yet no copies that I know of.

Anyone tried one? Do they work?

Where do Bode and Leach find all these tools?


img

101 1/2 on the bay

Re: how high will it go? *LINK*

#2

Re: 101

Moses Yoder in White Pigeon, MI

>The Lie Nielsen 101 is a better plane than that one for less money ;) I thought about that today while easing some edges and taking saw marks off some pine peices I was using to repair a table. Probably the most used plane in my shop and it's a tiny little thing but has a nice weight to it.

Re: how high will it go? *LINK*

#3

Re: how high will it go?

Todd Hughes

>Books for $500 to $850 ....I'm guessing this one will go for about $600 but you never know since it is a desirable and sought out plane, though not much jappaning. Good chance that it may be bought and redone though as it would be the perfect canidate for that.

Why doesn't anyone make an example today?....Why do you think originals are so expemsive and you see so many regular 101s and they can be picked up for $10?...Because even though they were made for about 50 years no one wanted or thought they needed a 101 1/2 over a regular 101.....I'm still having a hard time thinking of it's real advantage.

Imagine "big" tool dealers like this buy out many collections, get contacted by people that have heard of them to sell stuff too and of course go to large tool auctions. Doubt if really to much of what they sell are results of hunting in the wild though maybe some of it is .....Todd

Re: how high will it go? *LINK*

#4

Re: how high will it go?

john lucas

>Good Grief charlie brown. I have a no name that I picked up many years ago. It is very close to that in size and appearance. I use it constantly when I need to knock a corner off of something of slightly bevel small items. I don't know what the blade was but I've only sharpened it twice in all the years I've had it and it still cuts great.

Re: how high will it go? *LINK*

#5

Re: how high will it go?

Todd Hughes

>I am pretty sure that only Stanley made the 101 1/2 and not all were marked Stanley on the blade. To tell if you have a real one you need to measure it, a real one will be 3 1/2 inch long, I've had a few cut down 101s which look about identical but are a bit shorter then the 3 1/2 inch of a real one.Not much difference in size but in cash maybe about $600, eh? Apparently most but not all 101 1/2s had the little finger rest on the front .....Todd