First Draft
Jack Guzman from Maine
>I'm not sure if first draft is the correct term but it serves my purpose.
When I build a clock case I usually start by building a pine box around a movement. Then I create the case details in pine to get the dimensions right. I'm horrible at following patterns and designing on paper. I have to do things the hard way. Trial and error.This is a completed prototype in pine that I just finished roughing out.
I had received an antique movement from a friend. I did some research and thanks to numbers stamped into the movement I found the clock this movement was designed for. It is an unusual design and pretty intricate. I wasn't able to find a live example but an ebay seller had previously sold one of these and posted some very helpful pictures which I got through a google search.
So after printing a bunch of pictures I took it into the shop and worked out ways to create all the little details.Before I started I had doubts I could recreate all the details. Today I finally got it so I'm pretty excited. There are still a few details I have to work on but at this point I'm sure I can get it all to my liking.
Tomorrow I start shaping the walnut that will become the finished clock. The fun is just beginning. Thanks for looking.---Jack




