Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

How to use a Stanley #50

Posts

How to use a Stanley #50

#1

How to use a Stanley #50

Lee Schierer - McKean, PA

>I have a Stanley #50 plane. I have cleaned it up and sharpened the irons, I won't cut worth a hoot. Does anyone know how to set this plane up and make the adjustments? I have about a dozen different plane irons for it that cut various shapes.

Thanks,

Lee

Re: How to use a Stanley #50

#2

In case you don't have the manual... *LINK*

David Barnett - SW Florida

>Maybe this link will help. Next, check the grain direction of your stock.

Otherwise, sneak into the cut. Move the lever until you feel it grab the wood. Try it. Too much iron? Back it off, of course, but this time lower the iron until it just touches the wood. Try it. At least this way you can get a feel for the how much iron to give it.

If it's any encouragement, it takes me about one adjustment to get it cutting nicely. One of my favorite planes.


Stanley #50 manual

Re: How to use a Stanley #50

#3

One of the common tips that helped me

Bill Houghton, sunny Sebastopol, CA

>is starting the cut at the far end, cutting an inch or two for one stroke, then three inches for a stroke, etc., until you're cutting full length. This somehow gets the groove going so you won't go off track as easily.

Re: How to use a Stanley #50

#4

Thank you

Moses Yoder in White Pigeon, MI

>Thanks for posting the link to the manual; I saved it and will use it.

Re: How to use a Stanley #50

#5

Re: Thank you *LINK*

MikeW

>Moses, don't know if you've been to Alf's web site. In combination (sorry for the pun) with instruction (excellent instruction and videos), there are links (including the above) to manuals.

Take care, Mike


Alf's Combi plane page

Re: How to use a Stanley #50

#6

Re: Compare...

paul womack

>Alf's helpful combo plane page will provide much guidance for you.

In particular it has a link to the manual for the Record #050, a very similar tool.

Perhaps reading BOTH manuals could prove helpful.

BugBear