Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Site Black Spray for saw sharpening?

Posts

Site Black Spray for saw sharpening?

#1

Site Black Spray for saw sharpening?

Tony - Memphis

>Anybody know where I can order some site black spray to spray my saw before sharpening it (as in the saw sharpening video)? Or perhaps what else works well?

Thanks,

Tony

Re: Site Black Spray for saw sharpening?

#2

Re: Site Black Spray for saw sharpening?

steve mackay

>Try your local machine shop supply. I've gotten blue " spotting " ink for dies and I think I remember a suitable spray was on the shelf also.

Re: Site Black Spray for saw sharpening?

#3

Soot

Stephen Shepherd in the State of Deseret

>

Re: Site Black Spray for saw sharpening?

#4

Re: Site Black Spray for saw sharpening?

mike hamilton

>Try any decent sized gun store or the hunting section of sporting goods stores (or WalMart).

Regards,

Mike

Re: Site Black Spray for saw sharpening?

#5

Re: Site Black Spray for saw sharpening?

Dean J in MN

>I've run a black magic marker over the teeth prior to jointing to aid seeing the flats. But soot works well too if you happen to have a candle in your shop. I've also marked the last gullet I filed prior to shifting the blade over in the vise. I tend to to this if the saw is just being touched up as I sometimes lose track of that last gullet due to all the gullets being quite shiny.

-Dean

Re: Site Black Spray for saw sharpening?

#6

Matte black sumi ink, stick or bottle (art shops)

David Barnett - SW Florida

>

Re: Site Black Spray for saw sharpening?

#7

Re: Site Black Spray for saw sharpening? *LINK*

Hank Knight

>Tony,

None of the gun shops around here have sight black so I order it from Midway USA, a gunsmithing and shooting supply house that sells online. They sell an aerosol can for about $6.00. I'll warn you, though, once you get on their e-mail list, they'll send you so many promos that you'll have to empty your mailbox twice a day. That's exaggeration, of course, but not much.

Hank


Midway USA

Re: Site Black Spray for saw sharpening?

#8

P.S. Search Terms

Hank Knight

>If you go to Midway's site, search for "sight black aerosol." If you just search for "sight black," you'll get over 200 hits. They have two brands, one is $6.95, the oter is $7.95. I have no clue what the difference is.

Hank

Re: Site Black Spray for saw sharpening?

#9

$1

Wayne Carson "TX"

>

Re: Site Black Spray for saw sharpening?

#10

Re: Site Black Spray for saw sharpening? *LINK*

Marv

>Tony,

I use layout fluid. It's called Dykem. It comes in different colors, blue, red, black. I prefer the red. The container has a brush under the lid. You merely brush the stuff on and remove it with Acetone or Dykem remover. It dries very fast.

The link below is to an eBay auction. If you don't like that, just google it.

Marv


Dykem Layout Fluid

Re: Site Black Spray for saw sharpening?

#11

Re: Site Black Spray for saw sharpening?

paul womack

>If you're sharpening LOTS of saws, as per Tom Law's video, you probably need (as opposed to want) the convenience of spray on sight-black.

If you're just doing the odd saw, holding the saw in a candle flame applies soot (also black :-) very nicely, and is more traditional, if that interests you.

Since I don't like having naked flames in my woodshop, I use a simple black marker, with the end mashed into a pseudo-brush.

BugBear

Re: Site Black Spray for saw sharpening?

#12

Thanks!

Tony - Memphis

>Lots of good ideas/sources.

Tony

Re: Site Black Spray for saw sharpening?

#13

snicker, snicker, snicker

Todd O. Cronkhite Maine Native, Presently Away

>

Re: Site Black Spray for saw sharpening?

#14

Re: Site Black Spray for saw sharpening?

Alan DuBoff

>Paul said:

"If you're just doing the odd saw, holding the saw in a candle flame applies soot (also black :-) very nicely, and is more traditional, if that interests you."

---

I use a candle myself, but have used a marks-a-lot as you do. I prefer the candle, even though it is messier, kinda like working solid fuel in a forge vs. propane to me...*grin* Somehow I just prefer working coal over propane in a forge...it is so filthy though...the candle ain't nearly as bad, just that soot gets all over my hands...nothing that doesn't wipe off...

For anyone that doesn't work with metal much (I raise my hand;-), you can use denatured alcohol to get the black marker removed...if you get it on anything other than the tooth tip, which I often do. Soot from the candle just wipes off, and I agree it is more traditional and the reason I do like/prefer it.