Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Really cheap glue brush

Posts

Really cheap glue brush

#1

Really cheap glue brush

Stephen Shepherd in the State of Deseret

>Well they are actually Free. All you have to do is make them. Brushes made from the inner bark (bast) of the basswood tree (Tilia spp.) are easily made and have some remarkable properties. The rough outer bark is removed and then when soaked in water, pounded and hammered the bast forms many fibers like the end of a glue brush. As it wears out it can be trimmed, more can be pounded and it ready to use again. Another added benefit of using a bast brush is that it contains chemical properties and phytocides that prevent mold and bacteria from growing in the glue pot.

Works for applying stains or finishes as well.

Stephen


img

Re: Really cheap glue brush

#3

Agreed

Bill Tindall, E.TN

>That is what I use. I got 100 of them at some flea mkt and find all manner of use for them.

I might pound bark if I was into boiling animal hides to make glue.

Re: Really cheap glue brush

#4

Alas, no basswood tree in backyard

Bill Houghton, Sebastopol, CA, drippy rainy day

>Using the "useless" bark from a tree for something does feel cool, though, I have to admit. If I did have a basswood tree in the yard, I'd undoubtedly have gone out to see if there were any limbs that needed pruning. Like Scott Burr and Bill Tindall, I use acid brushes. I also use old credit cards - run a bead of glue from the bottle, spread with credit card. Works a treat, and the glue snaps right off the card later, so I can use one card nearly forever.

Digressing and rambling...

We used to have a Siberian elm, the twigs of which have easily peeled and strong bark, kind of like dark birch bark. Unfortunately, it branched out into five trunks about three feet from the ground, resulting in a water-gathering crotch where the trunks branched out, and the trunk rotted out - something we discovered when one of the trunks fell over in one of our big storms, missing the corner of the kitchen by about a foot, taking out the wires to my shop, and scaring LOML no end. So we had to take it down.

ANYhow, when our first son was in Indian Guides, we had a whole project building model bark huts using the bark, woven over twigs bent and poked into holes in boards (the twigs of Siberian elm are very flexible when wet, so we were using the whole twig, so to speak); the kids loved it. And his pinewood derby car that year was a bark basket filled with grass. No speed at all, even after we got it up to maximum weight by pouring water over the grass; but he got first prize for creativity.

Re: Really cheap glue brush

#5

Old credit cards,no way...

Scott Burr in Ben Lomond CA

>Those get cut up into little tiny pieces.

What you need to use are those pesky Handyman club of American membership cards!

Or all of the credit card offers that say "your name here" on the fake ones that come very day in mail.

Re: Really cheap glue brush

#6

Lately

Bill Houghton, Sebastopol, CA

>I've been cutting off the embossed part on the bottom of the card, making it too narrow to fit in a reader, and shredding that part. Granted, this still leaves the magnetic strip at the top, but the population of people who steal credit cards and have the equipment to read the magnetic strip seems like it'd be kinda small.

If I'm wrong, maybe I should be changing my practices.

Somehow, the word has gotten out to the Handyman Club of America and the credit card companies that I'm not likely to join/sign up, so I get precious few of those things in the mail anymore.

Re: Really cheap glue brush

#7

Re: Lately

Dan Donaldson

>Run a super magnet over the strip and no more data. ;-)

Re: Really cheap glue brush

#8

Re: Really cheap glue brush

Mark Harrison - Brisbane, Australia

>The Australian Aboriginal people did exactly the same thing to make paint brushes. They would use a green piece of eucalyptus twig. They would either chew or pound the end the twig to get it all "brushy".

I tried when I was a kid after I heard about this and it does work. I reckon it would work with most kinds of green wood.

Re: Really cheap glue brush

#9

Jack Guzman from Maine

painter's spatula

Jack Guzman from Maine

>I was using those cheap brushes with the short black bristles and one piece metal tube handle.I either forget to clean them or just lose them. I always seem to not have one when I need it.Something about the disposable aspect keeps me from hanging on to any.One day I tried using a small steel spatula/trowel(not sure what it's called)that I found at a flea market.It has a thin,flexible,non edged blade about 1/2" wide that is cranked.The blade is about 3" long and the end is rounded.I found this to be the best glue spreader I've ever tried.When using hide glue I also use it to stir the glue in the container I'm heating it in.Glueing dovetails,it gets between the pins without smearing glue all over the sides like a brush does. For edge glueing I can control the thickness of the glue by pressure as I spread it.There are times when a brush is necessary,like unflat matched surfaces as in a break,but all in all I find it's all I need.Also,it's easy to clean. Even if left with dried glue on it.---Jack

Re: Really cheap glue brush

#10

Re: Really cheap glue brush

Paul Kierstead

>Well, I'd be guessing Stephen's post isn't really about saving money or what glue brush to use.

That is really neat, Stephen. Was this used at some point? I wish I had access to some of the bark to try it out "just because".

Re: Really cheap glue brush

#11

Exactly

Stephen Shepherd in the State of Deseret

>I have paid over $15.00 for a bridled glue brush and $12.00 plus shipping for traditional linen wrapped bristle glue brushes, so cheap wasn't the point. It was the alternative, which was used in the nineteenth century as were other things.

If you don't have a basswood tree you might have that ever present cane or reed (Phragmites spp.). The end does not need to be soaked in water but just turned into bristles by pounding with a hammer.

The upper examples are the really hard variety that grows in the midwest and east, the lower example is what grows out here in the west. The western stuff works a time or two but doesn't last like the eastern cousin.

They are hollow and hold quite a charge of glue. These were used by chair makers as they get the glue down in the sockets easily.

Stephen


img

Re: Really cheap glue brush

#12

Thanks Mark

Stephen Shepherd in the State of Deseret

>Interesting fact about eucalyptus twigs. Wondering what else others used?

And of course you know the aboriginals' paint binder was animal glue.

Stephen