Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Made me a plane

Posts

Made me a plane

#1

Made me a plane

Wayne

>Have wanted to do this for a couple of years. It is made of hard Maple, walnut sides and cocobolo sole. Made the iron from scratch out of 1/4" O-1 steel, did the heat treating today and it was a piece of cake. Scared me to the point of almost not doing it. It sharpened to the point that I cut the hairs off the hair on my arm. I used a combination of diamond stones and scary sharp method. I think I need to put a handle on the heal of it but don't know what kind. Any help??


img

Re: Made me a plane

#2

Re: Made me a plane

Glenn Madsen near San Francisco

>Looks nice!

Why would you need a handle? Krenov style planes seldom have handles. Steve Knight's planes are often unhandled. Other folks make lovely smoothing planes without handles. If yours works as it is, then call it done, and go on to whatever is next.

I built a similar plane in the Krenov style several years ago, using a Hock blade set I purchased. Rasped to a comfortable curve in the back, it needs no handle. I could have made the mouth tighter, but it works pretty well.

Re: Made me a plane

#3

Re: Nice!

Dave Mount

>I'm with Glen -- I wouldn't put a tote on it, I'd just shape the body so it fits your hand comfortably. A while back Derek Cohen posted about an original Krenov plane he bought and it was shaped that way -- in fact, the body was actually assymetrical so it fit into the right palm better. I'll see if I can search up a link to that message.

Best,

Dave

Re: Made me a plane

#4

Re: Here's a link *LINK*

Dave Mount

>This shows the original Krenov plane I was talking about. The link is to the first of four pages in the article, but the best pics of the shaping are on the second page of the article.

Best,

Dave


D. Cohen's Krenov plane

Re: Made me a plane

#6

Re: Nice lookin plane...

Todd O. Cronkhite Maine Native, Presently Away

>Well, hey, another "around tuit" checked off the list eh Wayne? Real nice job I must add as well. seems the wait was worth it. I'd like to see more pics of it. Gonna make any more now that the juices are flowin'?

I have to say that unless you just must have a tote then leave it alone. Be sure to put a makers mark, the date and #1 on it somewhere,could be worth a fortune someday who knows.

T.O.

Re: Made me a plane

#7

Re: A little problem with shaping

Wayne

>My biggest problem is I made it out of two woods above the sole. If I do much shaping to fit my hand I am not to sure how it will look. And once removed not easy to put back. Probably make another and make it out of just one kind of wood. I would like to make some other kinds. Are there any books that show details. Maybe moulding planes.

Thanks for the encouragement!!

Re: Made me a plane

#8

Jack Guzman from Maine

Re: A little problem with shaping *LINK*

Jack Guzman from Maine

>This isn't a Krenov style but it is a very good resource.I think his website also contains an article about building a glued up type.I built a plane by following his method and it was fairly simple.

For some ideas on molding planes you could check out Tod Herrli's DVD "Hollows and Rounds".---Jack


building a coffin smoother

Re: Made me a plane

#9

Re: I like Norse Woodsmith Site

Wayne Carson "TX"

>I found this site a couple years ago. Made a few dovetail saws for myself and my boys from his instructions. His site is what got me into making this plane.

Re: Made me a plane

#10

Sweet little plane

Stephen Kirk in Quakertown, PA

>But now your making me feel bad that I've had Krenov's book for about 2 years and haven't made a plane yet. As soon as I get that round tuit, though, I'll make. Hope I can do as good as you did! I quite like the look of different woods on the plane. Makes it distinctive.