Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Nesting Tables progress report

Posts

Nesting Tables progress report

#1

Nesting Tables progress report

Roy Anderson

>Thanks to numerous tips from folks on this message board, progress is being made on my assignment from my Daughter -- make a set of nesting tables for her apartment. After reviewing several plans, I came up with my own design, and wisely, it turns out, decided to make a full scale prototype in scrap pine (see pic).

The design is working out great. This is the smallest table. It is supposed to be craftsman style, slightly modified to be trimmed down a bit.

This is an exercise in mortise and tennon joints, all hand cut, I might add. By the time I finish this project, I will be able to chop a mortise, that's for sure.

The table is rock solid, fits together like a socket (whew!) and is as square and level as my eye can detect. Bringing all my skills up to the required level has been a challenge, though rewarding. Marking and layout, simple crosscutting with precision, planing to square, all the basics had to come up a notch.

I'm building the middlesized table now, also a prototype in scrap pine. By the time I get to the Mahogany finished product, I hope to have my skill level up to snuff. So far, so good.

Thanks again for all the tips, everybody.


img

Re: Nesting Tables progress report

#2

Pretty design

Bill Houghton, Sebastopol, CA, rain's back

>Nice design - kind of a tiny library table*.

Most nesting tables nest by having one side open (no stretcher). It looks like yours will nest by putting one table atop the smaller one, like a Russian doll; is that right? I've always thought most nesting-table designs looked weak for lack of a stretcher on the one side.

*When we moved back from Michigan 35 years ago, we left behind a nice old library table. It's been one of my regrets since that we didn't make room for it on the moving van.

Re: Nesting Tables progress report

#3

Looking good Roy!

Scott Burr in Ben Lomond CA

>I built a set of A-C nesting tables a few years back. Fun project. Depending on how your going to finish them, you might want to consider finishing the parts before assembling them. Losts of nooks and crannies ya know.

Re: Nesting Tables progress report

#4

Re: Looking good Roy!

Todd O. Cronkhite Maine Native, Presently Away

>I must say as well that this "practice" table is indeed looking good. Glad to hear that the skills are getting challenged. I've never been a fan of square corners tho as they hurt when you bump into them and can seriously injure a child. I vote that you round 'em off.

How about showing us the saw that is attached to what appears to be a oped handled D/T in the background.

Keep on choppin'

T.O.

Re: Nesting Tables progress report

#5

Here's the saw

Roy Anderson

>Todd:

Here's the saw. It's a Lie Nielsen dovetail saw. My current favorite saw. I use it for tenons. I use it for cross cutting small pieces. It is a great saw.


img