Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Chisel handles ala Schwarz/cherubini

Posts

Chisel handles ala Schwarz/cherubini

#1

hb

Chisel handles ala Schwarz/cherubini

HB

>HAPPY NEW YEAR!

I managed to get my hands ono a couple of W. Butcher shisels and I want to rehandle them in the manner of Mr. Schwarz annd Cherubini's handles, except I have no idea what length the handles should be....

There's were scaled off those in the seaton chest, but I don;t have accesss to any good inages, nor do I have tthe expertise to scale the handles from an image.

Does anyone have any input to the length of the handles - I do know that they vary based on the width of the chisels - I am looking for input for chisels 1/4 inch through 1 1/2 inch.

It was a good day of rust hunting.

Thanks.

HB

Re: Chisel handles ala Schwarz/cherubini

#2

Make them a little long.....

Paul in NJ

>and trim until they feel right.

Paul Dzioba

Re: Chisel handles ala Schwarz/cherubini

#3

Long enough to...

Scott Burr in fridgid Ben Lomond, CA

>Get your hand around it and leave a safty margin for mallet blows if you plan on using one YMMV.

Re: Chisel handles ala Schwarz/cherubini

#4

Re: Long enough to...

Patrick Gibbons, Houston, TX

>In his book, The Patternmaker's Assistant, Joshua Rose talking about a paring chisel's handle states that, "...the total length of handle being six inches... and the diameter... being one and a half inch. This shape and size gives a good purchase, especially from A to B, where the hand is most often applied, the end, E, being against the operator's shoulder." On page 35 he illustrates the shape of both the paring and firmer chisel and advises that the paring chisel should be of the exact shape and measurements.

It is interesting to note this comes from the sixth edition dated 1889. Reading this book, it seems to me that many of the methods of work that Adam Cherubini has shared with us from the 18th century are still used in principle by 19th century patternmakers. While the shape of the chisel handle looks more like the 19th/20th century preference, Rose assumes it is used against the shoulder.

Re: Chisel handles ala Schwarz/cherubini

#5

hb

Re: Long enough to... *LINK*

HB

>Thanks to all of you with your recommendations. Paqtrick, thanks to the wonder of the web, I was able to find a PDF of a book by Joshua Rose and the page that discusses the handles as you described it.

The information can be found on page 8 of the pdf doxument at the link below.

Thanks again fellas.

HB


http://archive.lib.msu.edu/DMC/digital.lib.msu.edu/collections/applied/modernmachine2/ASB-15.pdf?CFID=7488284&CFTOKEN=63034447&bcsi_scan_FBA36CC5DE08E987=0&bcsi_scan_filename=ASB-15.pdf