Re: Holding down boards? What I ended up with
Dominic Greco in Richboro PA
>Hello Everyone,
Wow, did I have a great day in the shop today! I spent a good portion of it flattening some 4/4 rough sawn cherry boards. I first cut them to length and then used a set of simple shop built battens to plane "against".
The battens were so simple to make that I made (2) of them. I bought some 3/4" hardwood dowel from Lowes and then used some scrap Maple and Walnut. I think they took all of 15 minutes to make.



Only one small problem. The holes on my bench are just a tad off from being equally spaced. So the battens work on some of the holes, and not on others! So it was actually a good thing that I made two.
I was about to make that pop up stop like that suggested to me on another woodworking forum when I realized I already had something I could use. My Tail Vise! I just got a piece of scrap and dropped it in the vise so that it's top was just under the thickness of my stock. It made a perfect stop. So between the batten and the stop, I was all set.
I made the battens last night. So I was all set for today's exercise. I started with my Scrub plane then moved to my No7. As work progressed, I started using more and more of my planes. I just wanted to see which ones I preferred for this operation. Well, I think the Scrub Plane, my Union No7, and my 604 were my favorite ones to use. Plus I finally got to use my LV Winding sticks that I got for my birthday last year.
Thanks again for all your help and suggestions.
See ya around,

Dominic




