Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Sliding bevel gauge question

Posts

Sliding bevel gauge question

#1

Sliding bevel gauge question

Nathan Pettigrew

>Hello all,

Can anyone describe (or better yet, have pictures) of how a sliding bevel gauge with a thumbscrew at the bottom (vs. the swivel point of the blade) of the handle works? I was wanting to make myself a gauge and have been unable to find any details of how they work.

Any help or pointers would be most welcome.

Thanks,

Nathan

Re: Sliding bevel gauge question

#2

Re: Sliding bevel gauge question *LINK*

David Miller from Iowa

>See Link


"Butt" Bevels

Re: Sliding bevel gauge question

#3

Re: Sliding bevel gauge question

Bill Houghton, rainy Sebastopol, CA

>Two of mine have a screw with a tapered end that acts against a wedge at the pivot point; I can try taking mine slightly apart tomorrow and take some pictures if it would help you.

One, which I have yet to repair, seems to have a threaded rod that screws into something at the pivot point. I haven't figured that one out yet, but I think it pulls a wedge down, rather than pushing one sideways against the beam.

Re: Sliding bevel gauge question

#4

but... *LINK*

Bill Houghton, rainy Sebastopol, CA

>why make one? With a little digging around, it's not hard to find them at flea markets and garbage sales, and they're still available from the hand tool woodworking businesses - see link below.


Lee Valley sells them

Re: Sliding bevel gauge question

#5

Re: but...

Nathan Pettigrew

>Thanks for the pointer to that article. I looked up some of the patents mentioned and found some good info. Google patent search, it's a good thing. : )

I'm making it because I've got an interest in learning to make tools. I thought I'd start with something easy. I started looking at different bevel gauges and like the idea of not having a knob or wingnut sticking out one side.

All the info I'd seen until now just showed the outside of these butt lock bevel gauges.

Thanks again y'all. I'll post pics of the finished product.

Nathan