Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

How I've spent my New Year's Day

Posts

How I've spent my New Year's Day

#1

How I've spent my New Year's Day

Bill Houghton, chillyish Sebastopol, CA

>In some cultural tradition (I once knew, but have forgotten, and am prepared for that moment of joyous wonder if I learn again), what you do on New Year's Day predicts how you'll spend the next year. If so, great: I spent this afternoon trying out the Veritas Mk II sharpening jig I picked up recently (first chance to use it), including honing the also-new LV iron for my No. 65 block plane (chunky little bit of steel), in preparation for my next bout of trim carpentry. Good buys, both. I'd been resisting honing guides for years, feeling that they were insufficiently macho or something; but the increase in precision is impressive, although using it is a lot fussier than grabbing the chisel/plane iron and going at it. I'd even purchased the camber roller, and got a pretty nice camber on my carpentry frankenplane. And the 1/8" thick plane iron for the block plane really works well.

It's about an hour and a half yet until dinner, so I might go out and spend some time on shop organization, too; it'd be nice to work this year in a shop that doesn't look like the back room of the Salvation Army on a tool-donation day.

Re: How I've spent my New Year's Day

#2

Re: How I've spent my New Year's Day

Todd O. Cronkhite Maine Native, Presently Away

>what you do on New Year's Day predicts how you'll spend the next year.

Well, that's good news and bad news.

The good news: I spent the day organizing and cleaning up the shop,and it has never looked so good, nor has it ever had so much stuff in it with so much extra room to spare. :~)

The bad news: Looks like the Whooopee will be kinda' slim for the year. :~(

T.O.

Re: How I've spent my New Year's Day

#3

Part II

Bill Houghton, chillyish Sebastopol, CA

>Got some cleaning up done. Moved the braces from a milk crate to hanging from strings (one of this year's projects, when the round tuit inventory is better, is making drill-and-brace storage), which freed up room for both the Oregon Abrasives toolbox sharpening kit and some electron-burning purchases of this last year to be properly stored. About 10% of the floor is newly visible.

Then dinner with LOML, watching the Mummer's Parade on Tivo, part of her heritage that I truly appreciate.


img

Re: How I've spent my New Year's Day

#4

Re: How I've spent my New Year's Day

ernie miller

>sounds like a bad Omen for me! I spent the day doing honey do'd and the rest of the time was spent lounging with the wife. we are both happy so that may be what the new year brings for me.

Re: How I've spent my New Year's Day

#5

Re: Part II

Kevin French, Antrim, NH

>That one way to get them out of the way.

I got to spend the afternoon driving my grandkids home in a snowstorm. Then blowing the snow out of the driveway. Walks and deck tomorrow.

Re: How I've spent my New Year's Day

#6

I hope so Ernie.

Todd O. Cronkhite Maine Native, Presently Away

>

Re: How I've spent my New Year's Day

#7

Bill, here's mine

Todd O. Cronkhite Maine Native, Presently Away

>I have many more braces then these 5, but it was unreasonable for me to hang 'em all up, so I settled on these 5 as my primary users.


img

Re: How I've spent my New Year's Day

#8

Re: Bill, here's mine

Todd O. Cronkhite Maine Native, Presently Away

>this is a quick shot of the main body of my shop. Look at all that open floor space! See my homebuilt lathe in the background?

T.O.


img

Re: How I've spent my New Year's Day

#9

Nice

Bill Houghton, chillyish Sebastopol, CA

>Nice size shop, Todd. I like the lathe - let's see a better pic.

Re: How I've spent my New Year's Day

#10

Quite a drawknife there, too

Bill Houghton, chillyish Sebastopol, CA

>You planning to build a clipper ship, Todd? That looks like a mast drawknife to me.

Re: How I've spent my New Year's Day

#11

Well if that's true...

Scott Burr in fridgid Ben Lomond, CA

>I'm going to be in the Twilight Zone most of the new year. Got to sleep in a bit (a wonderfull thing) then watched some of the TZ marathon.

Worked on the box to hold my new marking knifes and then orgianized and files away last years wood working rags. After dinner I got to crack open the Workbench book.

You think you have enough braces yet Bill?

Re: How I've spent my New Year's Day

#12

I'm with Scott!

Brad in Ottawa

>Instead of shop time I got to shovel snow... yet again!

I did manage to sneak in to check out my supplies for the Shaker Box Kits that I will be trying later this month.

Happy New Year!

Brad

Re: How I've spent my New Year's Day

#13

Re: Nice

Todd O. Cronkhite Maine Native, Presently Away

>I like the lathe - let's see a better pic.

Hang on Bill, I've been working on pics all day. I've got 'em downloaded, but need to re-size them, and wrote up some notes. When I finally pot them I'll start a new thread.

Yes, that's a big drawknife. It measrues right a 25" from handle to handle. I hung it there as it didn't fit into my drawers very well. One day I'll turn some wooden handles for it. I forget where I got it--flea market or e-bay, flea market I think. Several years ago at a MWTCA meet I passed on a Snow and McNally drawknife that was this sized or bigger and have been kicking myself ever since. Stupid, stupid, stupid I swear.

T.O.

Re: How I've spent my New Year's Day

#14

New Years Eve into early morning...

VLParisian

>We spent our Weekend and New Years eve and day with my BIL West of San Antonio near Castroville.

My BIL has a nice house on a large (5+acres) lot with plenty of live oaks, mountain laurel and mesquite on the property. It's semi rural. (Two of his neighbors still run cattle on their property.) There was a lot of wind all afternoon and evening. We watched a lot of fireworks going off and noticed a few minor burns in the grass that were quickly tamped out. After awhile, we noticed an orange glow coming from the other side of his property. Two adult sons went to investigate and didn't return for some time. After awhile the orange glow is replaced by steam coming from beyond the hill. The "kids" came back to report that they just saved the neighbor's shed and that nobody was home over there. The fire department came by long enough to hose down the area some more and told us them they were on our own, that they had several more fires to take care of and this one was under control.

However there were still several more smaller fires going on the other side of the barbed wire fence. Sooo...we grabed a few tools and drove around the backside of the neighbors property to fight small brush fires. In the meantime, the old rancher (Hugo) and his ladyfriend who owns the adjoining ranch show up with their shovels and rakes etc. They are both in their late 70's and watch as we proceed to take apart and cover with dirt one pile of mesquite brush that is burning pretty good. We then proceed across the "pasture" (I use that term loosely here) to put out several more small low piles of stuff that is glowing hot. Turns out the small low piles are nothing more than cow patties on fire. Some fresher than others. So you might say I started out the new year stepping in cow poop.

Everything ended well, no other property was lost. At about 3:00AM We wished everyone a happy New Year and headed to the house for bed.

On the plus side, I did get to read my new workbench book in the car on the way back to Houston.

Happy New Year to You and Yours.

Victor - in chilly Houston.

Re: How I've spent my New Year's Day

#15

Is that a Zyliss handle...

Kevin French, Antrim, NH

>hiding behind that display?

Re: How I've spent my New Year's Day

#16

Yup. Love that vise, got two of 'em

Todd O. Cronkhite Maine Native, Presently Away

>

Re: How I've spent my New Year's Day

#17

Re: Yup. Love that vise, got two of 'em

Kevin French, Antrim, NH

>If one is good, two is (are?) better.

Gott'a pair myself.

Re: How I've spent my New Year's Day

#18

Castroville!?!

Scott Burr in fridgid Ben Lomond, CA

>The Artichoke capital of the world...

I worked in those fieldes and I've never seen cattle run by 'em

I am in Twilight Zone... AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

Bill You were right...

Help me Mr. Wizard!

Re: How I've spent my New Year's Day

#19

yep about 20 miles west of San Antonio, TX

VLParisian

>On U.S. 90 going towards Hondo.

Re: How I've spent my New Year's Day

#20

OK, now your pulling my leg...

Scott Burr in Ben Lomond CA

>Victor,

We all know Hondo is a John Wayne move... I've seen it, in 3D even!