We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Just finished your Workbench book! I really enjoyed the way you wrote it, as if we were having a one-on-one about workbenches. I now have a much better understanding of what features to build in when I start to work on my own creation. Thanx again!
I bought the book as a gift for a friend, I took a read of it first "just to make sure" it was as good as I hoped it would be, it was even better. I also printed out the bonus chapter and included it with the book, he loved it!
>Santa brought me an autographed copy (how did he. . .er, she. . .know that's what I wanted?). Thus far I've only had time to do a breeze through, but what I've seen makes me anxious to get to a careful reading.
>Next time I run into you Chris, I want to get my book autographed.
I got my Roy Underhill book autographed. He said "to Roy, from Roy, Best wishes." Cool! Now that Chris is getting right up there with Sir Roy, I need his autograph, too.
>I was at the show in Novi Michigan a few years back and met Frank Klausz. I was a little embarrassed about it so I waited till nobody was around then I tried to hand him a pen and the back of my card to get his autograph. He refused to sign that piece of paper. Instead, he demonstrated making a peice of molding with a molding plane he built, gave me the piece of molding, and then signed a sample dovetailed piece he had made and gave me that. Of course by the time he was done there was a crowd again ;) Since then I have not been embarassed at all about asking for autographs. People like Mr. Schwartz and a number of others who have worked hard in the field of woodworking should have recognition for their accomplishments.
>I got my autographed copy for Christmas. Over the last week I've read the majority of it. Usually when I get a woodworking book I selectively read it. This one I read almost all the way through. I admit I did some selective reading on the building of the benches sections. I'll probably go back to these sections eventually because it is interesting to read and see the methods used to create the joints. The drawboring section was particularly interesting. It is one of the best written WWing books I've read. I probably read 80-90% of the prose in this one. I imagine I read 10-20% of the text in the other two workbench books I own.
The only downside is I already see the limitations of the bench I've been building for a while now. I believe my bench is based on a design by CS himself. It's actually a conglomeration of 3 benches featured in 3 magazines that were all pretty similar. The design included the "cheap bench" by Chris in PWW a few years ago. I should've built it out of the cheap materials suggested so I won't feel so bad when I wind up throwing it away in the future ;).
>I'd like to add my thanks as well! This book is a must-have for those of us undertaking the VSA (Virtual Schwarz Apprenticeship) approach to blended woodworking ;)
Here's hoping that the book does well enough that we'll see a lot more from Lost Art Press in the coming years. It's a good time to like wood.