Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Hats off to David Jeske!

Posts

Hats off to David Jeske!

#1

Hats off to David Jeske!

Scott Burr in Ben Lomond, CA

>My lovely wife gifted me with a marking knife set for Christmas. These are wonderfull! The weight and balance put my home made one (ala Kingshott) to shame. Guess it's going into retirement or being made into something else.

I'm in trouble now, as I eyeball his other offerings...

Now, down to the shop to make a nice box to keep them safe and sharp.


img

Re: Hats off to David Jeske!

#2

Re: Hats off to David Jeske!

Todd O. Cronkhite Maine Native, Presently Away

>Scott,

Do you not think that perhaps all the hints, website listings left around the house, and moaning about your homemade one didn't help just a little in acquiring this Gloat?

Nice haul, Dave does some very nice work.

Perhaps you can perfect you hints technigue to score a Saucer & Stiner, Wayne Anderson, Steve Knight, LN, Holtey, or some such next year. ;~)

T.O.

Re: Hats off to David Jeske!

#3

Great idea Todd...

Scott Burr in cold Ben Lomond, CA

>I'll start whining, pissing and moaning right away!

Re: Hats off to David Jeske!

#4

ROTFL!!

Hank Knight

>

Re: Hats off to David Jeske!

#5

Re: Hats off to David Jeske!

Wiley Horne

>Scott,

Very smart wife!--did you put a picture on the refrigerator to help things along? Anyway, you owe her.

One of the best things I like about Dave's marking knives is the thin blade, which will allow for a small pin entry. The blade stiffeners eliminate the gap, too, so it's a neat design all round.

Wiley.....thinking Dave turned an especially nice finial on Scott's knives.

Re: Hats off to David Jeske!

#6

Great idea Scott...

Todd O. Cronkhite Maine Native, Presently Away

>Everytime something goes wrong I'd either drag her into the shop or take the "ruined" piece to her and exclaim that with a this wouldn't happen and this expensive wood would'nt be ruined.

Better get right on it, only 363 days 'til Christmas. ;~)

T.O.

Re: Hats off to David Jeske!

#7

Re: ROTFL!!

Todd O. Cronkhite Maine Native, Presently Away

>And do pray tell Hank, just what are you laughing so hard for Mr. Man? Guilty conscience? Perhaps you can share some of your tips with Scott eh? ;~)

T.O.

Re: Hats off to David Jeske!

#8

I'll never tell! ;>)

Hank Knight

>

Re: Hats off to David Jeske!

#9

Keep 'em comming Todd...

Scott Burr in cold Ben Lomond, CA

>I can use all the help I can get. The countdown has begun!

Re: Hats off to David Jeske!

#10

Yes she is!

Scott Burr in cold Ben Lomond, CA

>I didn't have to resort to anything as blatant and repeative as Viagra emails. I did have a few pictures and web sites up on the home computer;^)

When looking at his knifes the blades seemed thicker than the one I made from a industrial hack saw blade. I was pleasantly surprised to find the are a bit thinner than the one I made and every bit as stiff.

Much nicer balance and a pleasure to hold also.

Here's the one I made, it's the little fish shaped critter.


img

Re: Hats off to David Jeske!

#11

Re: I recognize that sawtill

Glenn Madsen near San Francisco

>That's the one with the short grain dovetail parts that will go POP when stressed!

There was a point in my development when dovies for everything, gratuitous or not, was what I looked at. Doesn't mean I didn't cut them, though.

Re: Hats off to David Jeske!

#12

Eyeee your not the only one ehh?!?

Scott Burr in cold Ben Lomond, CA

>Mine hasn't blown or fallen appart yet... So to speak laddie!

It's a fine till no mater what one says about construction.

Re: Hats off to David Jeske!

#13

Glad I don`t live in California!

Bob Hackett

>Man,there`s just no keeping vertical surfaces free of graffiti out there!

Judging by your latest project your security needs a boost man.

At least it`s not spray cans.

MB

Re: Hats off to David Jeske!

#14

Re: Glad I don`t live in California!

Todd O. Cronkhite Maine Native, Presently Away

>Yeah, your right Bob! One thing for sure, when Scott marks his pieces he sure don't fool around!

In pencil I mark mine with a "T" for top, "B" for bottom, "IS" for inside, "OS for outside, and do it much smaller ;~)

T.O.

Re: Hats off to David Jeske!

#15

Re: In defense of the system...

Glenn Madsen near San Francisco

>Do you have a bathroom mirror with the markings in pencil still on it?

If they aren't large enough, an over anxious woodworker may miss a few things in the finishing steps. This mirror frame was hung without a clear coat, because the party was to be starting pretty soon. Now that was 5 years ago, but still...

Re: Hats off to David Jeske!

#16

OK, OK Guys...

Scott Burr in cold Ben Lomond, CA

>Ya know the eyes are the first thing to go! All kidding aside I usually use a pencil and mark small, but this till was made from Obeche(sp)

This is a soft wood and pencils would leave marks (dents) in the wood.

So I opted for the lumber crayon.

Re: Hats off to David Jeske!

#17

OK Scott...

Todd O. Cronkhite Maine Native, Presently Away

>that makes sense. No way could you get too over anxious about finishing it with maeks still on it--unlike some people we know eh? ;~)

Glenn, excuse me while I snicker at you. 5 years of looking at that mirror and you haven't fixed it yet? Talk about a looooooooog party! ;~)

T.O.

Re: Hats off to David Jeske!

#18

Re: Hey! It's the hall bathroom

Glenn Madsen near San Francisco

>