Come here dear boy, have a cigar...
Denis Ch�nard, Orl�ans, Ont.
>If you can sharpen it...
Christmas present, I received a Millers Falls Cigar shave. Cool, could have used that a couple months ago for a project...
Went to the shop tonight to sharpen the blade, and it ain't working. I know I'm missing something...
The "bevel" (what it would be if the blade was straightened) is easy enough to do. But when it comes to the "back", which is inside the circular blade, things get "funny"...
With my Viel belt sander I have no trouble grinding the "back", I can feel the resulting burr. But when it comes to hone the blade, I get an edge that's less sharp than the basic grind. I mean, I have trouble cutting some skin off my thumb (I'd never try that with any other edge tool...). I hone freehand (like with all my edge tools), I went so far as putting red marker on the surfaces to be honed, and I seem to follow the angles quite well.
The only possible explanation for the "dullness" is that, because of the circular blade, I'm kind of forced to hone sideways, and by doing that the blade digs in a minute amount in the stone, which basically dubs the edge. There's very limited movement available to do a to-and-fro motion (like a 1/4" or so), I tried skewing the blade while honing sideways, it helps a bit, but the blade still isn't as sharp as it should. Methinks I'll have to devise a jig to hone in a back and forth motion (hard to hold the blade in a consistent way doing that)...
Any pointers on how to achieve a sharp edge on that blade from hell?
TIA,
DC



