Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Hey it actually works!

Posts

Hey it actually works!

#1

Hey it actually works!

Mike Schwing from Maryland

>This is my first plane. I made it out of a wood probably not suitable for plane making - mahogany. I don't mind as this was just a trial run and it was nice working with such a workable species.

I made lots of goofs - the throat is nearly 1/8" with the blade inserted. (Houck, btw). I know what I did wrong for next time. Also, I left too much space for the blade's horizontal width, but it will register against one side nicely. I also think the metal rod is too near the top - all things I can easily adjust.

I'm going to make another, better, similar one for my Dad for Christmas out of bubinga I think. Comments and suggestions welcome!


img

Re: Hey it actually works!

#2

Jack Guzman from Maine

Re: Hey it actually works!

Jack Guzman from Maine

>Very interesting design. Sleek lines like a sports car. Great job. The only way to learn this stuff is to do it. My first plane was pretty clumsy lookin with a few oopses.---Jack

Re: Hey it actually works!

#3

Re: Hey it actually works!

Todd O. Cronkhite Maine Native, Presently Away

>Mike, I think it's way cool! Certainly non-traditional design as we know it, but hey, there's certainly nothing wrong with that, and in my opinion adds to it's interest.

What makes you feel the rod is to high? Does the blade back out during use? Looks to me, but I'm not for sure, that you chopped out the throat and is not of Krenov design, am I correct?

It looks to be of #5 size, is that right?

I like it, and mistakes included I think you should be proud of it.

T.O.

Re: Hey it actually works!

#4

Well done mistakes and all...

Scott Burr in Ben Lomond, CA

>I think it's a great first atempt. Very swoopy, reminds me of a Flintstone's car.

Re: Hey it actually works!

#5

Gorgeous...

James Watriss

>My one suggestion:

I think the overall form is very attractive, but I think you'll find that having the front swoop underneath like that will cause the front of the plane to ride up and over shavings, making it hard to maintain even shaving thickness. Having a front line that comes vertically down the the wood at 90 degrees will help keep miscellaneous junk in front of the plane instead of underneath it. So maybe you could keep the upper curves intact, and just drop the lines straight down, or even have a slight recurve.

Re: Hey it actually works!

#6

Thanks!

Mike Schwing from Md.

>Thanks everyone for the comments and the suggestions. I'll take them all to heart for the next batch.

Re: Hey it actually works!

#7

Re: Hey it actually works!

Robert Henderson

>Looks very cool! Reminds me of a crocodile's head

Re: Hey it actually works!

#8

Re: Hey it actually works!

Todd O. Cronkhite Maine Native, Presently Away

>Reminds me of a crocodile's head.

Oooooooooooo, don't be saying that Robert, or else Todd will be wanting to paint teeth on it! ;~)

T.O.

Re: Hey it actually works!

#9

Re: Hey it actually works!

Dan Donaldson

>If, as you say, this is going to just be a first experiment and not get used long term, you might want to think about doing some of your carving magic on it. A weird looking bug on a brain and some other things I remember come to mind that might make for a very interesting display piece.