Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

I. Sorby dates?

Posts

I. Sorby dates?

#1

I. Sorby dates?

Wiley Horne

>Was very pleased today to receive a full set of plough plane irons, marked "I. Sorby" and under that "Sheffield". Question: Does anyone have a reference as to when I. Sorby was making tooling in Sheffield?

Thank you,

Wiley

Re: I. Sorby dates?

#2

Re: I. Sorby dates? *LINK*

Patrick Gibbons, Houston, TX

>Wiley, take a look at the history of the present Sorby company at the link below. They give some information on I. Sorby which was acquired by C&J Turner from Sorby and Turner and used in the 19th century.


History of Robert Sorby Co.

Re: I. Sorby dates?

#3

Re: I. Sorby dates?

Don McConnell

>Wiley,

According to Ken Roberts (_Some 19th Century English Woodworking Tools_, � 1980), the "I. SORBY" mark began with Isaac Sorby, in Sheffield, about 1810. I don't know the source of this information, but it is consistent with claims of succeeding firms to have been established in 1810.

Though the "I. SORBY" mark seems to have been continuously in use into the 20th century, there was quite a succession of firms involved:

Sorby, Turner & Skidmore: 1814 - 1822

Wicker

(Sorby, Turner & Co. in edge tool makers listing, 1822)

Sorby & Turner: 1825 - 1828

Good Croft, Willey Street, Wicker

John Turner: 1833 - 1847

Sheldon Row, Willey Street, Wicker [1833 - 1834]

121 Saville Street [1837 - 1847]

Turner & Wheelhouse: 1852

31 Earl Street

(John Turner & William Wheelhouse)

Charles & Joseph Turner: 1854 -1857

31 Earl Street

Joseph Turner & Co.: 1858 - 1868

Castle Hill

(Joseph Naylor in firm, 1861)

Turner, Naylor & Co.: 1871 - 1872

Castle Hill

Turner, Naylor & Marples: 1876 - 1893

Northern Tool Works, John Street

(Charles Marples, son of William Marples)

Turner, Naylor & Co.: 1893 - 1909/1963

Northern Tool Works, John Street

Purchased by William Marples & Sons in 1909, but the Turner, Naylor & Co. firm continued operations until 1963.

Don McConnell

Eureka Springs, AR

Re: I. Sorby dates?

#4

Re: I. Sorby dates?

Wiley Horne

>Thanks so much Don and Patrick,

Another amazing over-the-top answer. This set of plough irons is complete, and has the same owner name stamped on each one. That kinda makes me think these irons are relatively newer and haven't passed through many hands. So maybe they're from one of the Turner companies. The only other clue to age I can see is that the cutting steel is laid on (laminated), and there is no Mr. Punch mark, or any mark other than I. Sorby, with Sheffield underneath on a second line. And the number of the plough iron, 1 through 8.

Thank you very, very much for such a complete answer.

Wiley