We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I came across this brace on the web and I have a few questions about it. The wording on the chuck says "Millers Falls".
1. What model is it and where would I get some more info/pictures of one? I couldn't find a listing in a copy of either the 1904 or 1949 MF catalogues.
2. It looks like some parts are missing. If so, any suggestions as to sources for replacements.
Any information on this brace would be appreciated. I'm just starting to collect some old tools and corner braces have piqued my interest.
You may have stumped the band with this one. I've attached a link to the definitive Millers Falls tool site--Randy Roeder's 'Old Tool Heaven'. Look in both breast drills and bit braces.
However. What you may find is that you have a contraption. Something put together from parts of different animals, for a specific purpose, or because that's what was available at the time, or just tinkering.
>I got a response from Sandy Moss (www.sydnassloot.com) about this item. It was listed under Stephen McClellan who was a MF salesman (hence the MF chuck) but he patented and produced the brace. From the pictures on his web site this item is missing the second crank that fits into the brace just above the universal.
Sounds like I probably wouldn't be able to find parts and would be better of passing on this.
>For anyone who is interested, this item just sold on eBay for $104.69. Whoever bought it was either looking for parts or had no idea that it was missing a significant part. Certainly not worth that much money in opinion.