Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Arts & Mysteries Column

Posts

Arts & Mysteries Column

#1

Arts & Mysteries Column

John Hoffman

>Adam, in the August column you said that you "deepen the dado for the shoulder. I think this last step is a food idea. Making the divider's shoulder a little deeper than the dado seems to help get a nice tight fit." Wouldn't deepening the dado for the shoulder on the socket mean that you get a sloppy fit? Maybe I am misreading.

Love the column!

John H

Re: Arts & Mysteries Column

#2

Re: Arts & Mysteries Column

Adam Cherubini

>Adam, in the August column you said that you "deepen the dado for the shoulder. I think this last step is a food idea. Making the divider's shoulder a little deeper than the dado seems to help get a nice tight fit." Wouldn't deepening the dado for the shoulder on the socket mean that you get a sloppy fit? Maybe I am misreading.

Sorry about this John. What I think you can't see is the step in the divider. The back half of the divider fits in the dado with a little slop. The front half over hangs it. See you really need a little slop in the dado joint width wise just to get the dust board or divider in. But the last little bit must be tighter than that if you want a tight looking joint.

So the divider is stepped. When I sawed the dovetail on the divider, I sawed the shoulder proud.

Okay second crack at this isn't much clearer. If you still don't get it, end me an email offline and I'll put up a blog page showing these parts in better detail.

Adam

Re: Arts & Mysteries Column

#3

Re: Arts & Mysteries Column

John Hoffman

>Adam, I sent you a message off line and hope we get to see a blog.

Re: Arts & Mysteries Column

#4

Re: Arts & Mysteries Column

kees

>where can I find the blog? It disappeared?

Re: Arts & Mysteries Column

#5

Arts & Mysteries blog address

Adam Cherubini

>I hate it when that happens.

www.artsandmysteries.com

This site redirects to:

http://www.popwood.com/blog3/