Est. 1998 — 27 years of woodworking knowledge
wrap around hinge
Bob Sobieck
>I started this in the normal message group but thought I would get good feedback here too.
I am looking for a wrap around hinge. I would like to swing doors all away around the outside of a 3/4" thick cabinet side, a full 270 degrees. I found a less expensive version but it leaves a lot of brass to be seen.
Is there a Euro versoin that is hidden?
Experiences, feedback appreciated
Bob
Re: wrap around hinge
Bill Sams
>Bob,
You may be already looking at this hinge available from wwhardware.com
link http://wwhardware.com/catalog.cfm/GroupID/Cabinet%20Hinges/CatID/Hinges%2C%20Commercial%20Casework/showprod/1
or
http://wwhardware.com/catalog.cfm/groupid/Cabinet%20Hinges
and go to commercial hinges
I used them for an entertainment center last year, although when open they do expose alot of hinge, and from the side a fairly broad view as well, they do work well.
here's a link to my project. Only the middle pair of doors have the 270 hinge. The upper and lower sets have soss hinges.
http://jwsjoinery.com/jws/becenter.html
Good luck
Bill