Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Rabbet plane from eBay

Posts

Rabbet plane from eBay

#1

Rabbet plane from eBay

Mark in B'ham

>I never win the auctions on eBay, but nobody was bidding against me and I won this for 99 cents (+s/h). I wasn't too sure if it could be fixed up for use or not, but I thought that at least I could scavenge the blade and build a new plane for it. What do you all think? Is that apparent crack going to be a real problem? The crack looks like it goes all the way through, it was on the back side picture too.


img

Re: Rabbet plane from eBay

#2

Here is the back side pic 

Mark in B'ham

>


img

Re: Rabbet plane from eBay

#3

Jim in Burlington Ont.

Bad Sole

Jim in Burlington On

>I'd be more worried about the poor condition of the sole and the wide open mouth. Some kind of thin glue like chair doctor would fix the crack. But a new sole would be in order if I owned it.

Re: Rabbet plane from eBay

#4

Re: Bad Sole

Mark in B'ham

>Yeah, I'll have to get it in hand to really assess what I got, but the sole looks pretty worn and not quite flat. If I go with building a new plane for the iron, what wood would you all recommend?

Re: Rabbet plane from eBay

#5

Depends

jim reed @ tallahassee

>Depends on whether the crack moves. Does not look that bad to me. I agree with Jim that the sole needs some attention. Looks like it needs to be squared up. Pretty good deal for $.99. Good luck.

Re: Rabbet plane from eBay

#6

Re: Bad Sole

Adam Cherubini, NJ

>What might be the harm in a wide mouth on what looks like a square rabbet?

I'm not trying to be cute, by the way. I suspect guys use these as poor man's shoulder planes or maybe other purposes? I've watched the guys in Wmsburg use their C&W rabbet for all sorts of things. It seems set to take smoother like shavings (maybe my smoother anyway). But I wouldn't want to cut a rabbet with it.

In my shop, I use these to cut rabbets. That can be somewhat of a chore. I'm always looking to speed the process up since I'm not usually too fussy about rabbets. Don't care if the surfaces are pretty. I just need the wood not there anymore. So I actually prefer the "clapped out" rabbet with the wide mouth. Even strraightening the sole doesn't seem to make much difference in the performance.

From what I could tell from the picture, Mark got a pretty nice plane cheap. Its nicer than mine certainly.

Adam