WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

OT, kitchen update, just for Scott Burr

Posts

OT, kitchen update, just for Scott Burr

#1

OT, kitchen update, just for Scott Burr

Bill Houghton, Sebastopol, CA

>The latest on our kitchen. I apologize for the strange colors - I took the picture quickly this morning before heading over to visit my aunt and uncle, and it wasn't yet light enough to use daylight.

Our old kitchen was kind of gloomy, so we made sure we had enough lighting in the remodel (the kitchen is "trapped" inside the house, with the only windows being way down at one end; though we are adding a solar tube skylight in the dark end). I think we may have gone overboard, as it's now bright enough to call down alien spacecraft, or perform microsurgery. Ironically, we find ourselves using the same light over the sink that was our main kitchen light before, but, between a brighter color scheme and more efficient lighting, it's a lot lighter than before.

Note the cabinet drawer and door handles - courtesy of Lee Valley, which produces some truly fine cabinet hardware, in addition to making the tools that are occasionally mentioned on this forum (no affiliation, just a satisfied customer).


img

Re: OT, kitchen update, just for Scott Burr

#2

Looks great Bill!

Scott Burr in Ben Lomond CA

>Thanks for the picture. Sorry for the delay in posting, busy weekend I'm just catching up on all the posts.

You did a fine job on it, bet your glad it's finally finished eh?

I realy like the contrast between the floors, cabinets, counter tops, and paint.

You can never have enough lighting in a kitchen IMHO.

I would have left the shims sticking out, and finished them to match the flooring myself;^)

Thanks again for sharing, you should be very proud.

Re: OT, kitchen update, just for Scott Burr

#3

Finished?? Notatall

Bill Houghton, Sebastopol, CA

>Still have to do the vent fan, solartube skylight, baseboard, trim, breakfast nook (not visible in the pic because I'm standing in it to take the pictures), two and a half windows (just trim on one that our son already installed), foundation work, siding work, outside painting...there must be something I'm forgetting.

But let me say, it's REALLY nice to have a kitchen again. Camping out was getting old.

Re: OT, kitchen update, just for Scott Burr

#4

YOWZA!

Scott Burr in Ben Lomond CA

>No shop time for you in the near future. You did well in hiding all of that in your pic!

Re: OT, kitchen update, just for Scott Burr

#5

Re: YOWZA!

Todd O. Cronkhite Maine Native, Presently Away

>Bill it really is looking very nice. I like the floor the most, but the simply white painted cabinets, with the contrasting black pull really look nice as well. Are the walls yellow? It's hard to tell with the light on. I painted the ointerior of my current house Frosted Lemon, which is a very light yellow, and I like it alot. I bet your "Husband Stock" is soarking with the Mrs. eh? Have you managed yet to use this re-do as an excuse to acquire any new tools? ;~)

Tell us more about that floor.

T.O.

Re: OT, kitchen update, just for Scott Burr

#6

Re: YOWZA! *LINK*

Bill Houghton, Sebastopol, CA

>Yes, yellow walls - LOML tells me the color is "Lily of the Valley." She thought about lemon, but decided on this color instead. When it was just walls, it was pretty bright, but with the cabinets in, it's settled down to a nice wall color. Trim is an off-white rather than the stark white of the cabinets.

The pulls, by the way, are at the link below. "A" for the drawers, "E" for the doors. We're quite pleased (and let me tell you, it's sure nicer pulling a drawer open with a handle than by gripping it with fingertips at the edge, which we were doing for about a week).


The cabinet pulls from Lee Valley

Re: OT, kitchen update, just for Scott Burr

#7

Re: YOWZA!

Ernie Miller

>I ysed a pail sunshine in the sun room it's a pail yellow you would not beleave how much it britened up white. I also like the ketchen redo

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.