WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

The Dark side of dump pick'n

Posts

The Dark side of dump pick'n

#1

The Dark side of dump pick'n

Kevin French, Antrim, NH

>I got a wild hair today and Hoed out my barn to put up some shelving. It took a while to get enough 'Stuff' out to put the shelving in. I was just about to the point if I wanted to put something in the barn I had to take something out.

I had 8 sets of shelves, (yes from the dump) and managed to get 6 put up in the barn. One of the is 6' x 6' x 3'.

The stuff on the lawn is only about a 1/4 of the stuff in the barn

Just about everything you see is from the dump, except the snowblower, (red behind bike), the green 2 wheeler, and some of the lumber, 1/2 of the was milled off my wood lot.

95% of this went back in tonight 3% is headed back to the dump.


img

Re: The Dark side of dump pick'n

#2

Re: The Dark side of dump pick'n

Ernie Miller

>Is this some sort of a challange? I don't have a dump but I do have a couple good dumpsters that I hit regulary. and then there is the garbage sales. My garage needs cleaned. I bet I got more crap than that to be sorted! As soon as the weather breakes I will be doing the same as you and will post a picture of my clean out mess.

Re: The Dark side of dump pick'n

#3

Time for a yard sale...

Scott Burr in Ben Lomond CA

>You ol' pack rat. What's the green thing(s) on the pallet next to Salvador Dolly?

Re: The Dark side of dump pick'n

#4

Re: Time for a yard sale...Close up

Kevin French, Antrim, NH

>I think you're talking about a pair of Table TOP Table Saws (?)


img

Re: The Dark side of dump pick'n

#6

So what do I do with the other 6 saws??????

Kevin French, Antrim, NH

>

Re: The Dark side of dump pick'n

#7

WHAT?!?!

Todd O. Cronkhite Maine Native, Presently Away

>3% is headed back to the dump.

Sounds sacreligous to me!, and I'm sure that it is also a violation of the Law. Ooooooooooo, you in a heap o' trouble now!! ;~)

I sure would like to what the 3% is. I betting it's the snowblower and sled, no wait, that's what it would be for me down here, tho I'd probably keep the sled, and at least rob parts from the snowblower, but then again, I think all thos parts would take up less space if left in present configuration, so I'd keep that too. What the heck could the 3% be?

Keven, you simply need another barn.

Re: The Dark side of dump pick'n

#9

Re: WHAT?!?!

Kevin French, Antrim, NH

>Actually 2 Table Saws, a Tools stand. 2 sets of shelving, I about 20#s of copper and a splitting maul I gave my nieghbor.

Besides I have a 'Double your Money' return policy.

Re: The Dark side of dump pick'n

#10

Re: Dados! Start stacking 'em up!

Kevin French, Antrim, NH

>This ISN"T a collection of Hand Planes, I've never heard of the Slippery Slope of TSs or even Corded Tools. Old Power Tools which these may or may not be, what they are was FREE.

Re: The Dark side of dump pick'n

#11

Re: WHAT?!?!

Todd O. Cronkhite Maine Native, Presently Away

>2 Table Saws

Can yopu salvage the arbors from them? Would the tops not make for good stone or tool flattening stations? Perhaps you could mount sanding disks on them? Yeak, ok, I'm not crazy about the sanding disk idea either.

a Tools stand. 2 sets of shelving,

You must be joking. You'll need them someday, but until then disquise them as a potting stand or something. One the stand put a bowl of water on it and call it a bird bath.

about 20#s of copper

Gee if nowt else, I'd take it to a recycler, or melt it down into ignots to be used as weights for some glue-up need.

and a splitting maul I gave my nieghbor.

You should of kept that Kevin, you never know when Thoreau will show up begging for a tool.

I still think you're breaking the Law, so CITIZENS ARREST! CITIZENS ARREST!! *

* Stolen straight from the Andy Griffith show.

T.O.

Re: The Dark side of dump pick'n

#12

Re: WHAT?!?!

Kevin French, Antrim, NH

>2 Table Saws

Can yopu salvage the arbors from them? Would the tops not make for good stone or tool flattening stations? Perhaps you could mount sanding disks on them? Yeak, ok, I'm not crazy about the sanding disk idea either.

GOOD POINTS BUT, I HAVE AT LEAST 7 MORE

a Tools stand. 2 sets of shelving,

You must be joking. You'll need them someday, but until then disquise them as a potting stand or something. One the stand put a bowl of water on it and call it a bird bath.

WHEN I NEED THEM I WILL FIND THEM

about 20#s of copper

Gee if nowt else, I'd take it to a recycler, or melt it down into ignots to be used as weights for some glue-up need.

I DON'T SELL THE STUFF I FIND I GIVE STUFF AWAY

and a splitting maul I gave my nieghbor.

You should of kept that Kevin, you never know when Thoreau will show up begging for a tool.

I HAVE 3 MORE AND A FOUR MORE HEADS

I still think you're breaking the Law, so CITIZENS ARREST! CITIZENS ARREST!! *

* Stolen straight from the Andy Griffith show.

T. O. ISAY AGAIN, THERE'S NO SLIPPERY SLOPE HERE. 7 TSs TAKE A LOT OF ROOM ESPECIALLY IF YOU ADD TO THAT 7 SCROLL SAWS, 2 JOINTERS, 3 BS, AND A DRILL PRESS. THAT DOESN'T INCLUDE THE ONES I USE. I CAN WALK AWAY FROM ALL OF THESE. WELL MAYBE I'D KEEP A COUPLE OF THE SCROLL SAWS AND MY 1941 BS BUT THE REST COULD BE OUT OF HERE TOMORROW.

Re: The Dark side of dump pick'n

#13

Re: WHAT?!?!

Todd O. Cronkhite Maine Native, Presently Away

>Yeah Kevin, I hear ya' Bro, I was just funnin' with ya. Trust me, I've reach my limits with over-saturation of stuff a few times myself. Just can't stand to it go to waste, but then again, just can't stand to store it forever either. Enough to drive a person completely whack-o. Kinda' like putting a Frenchmen* in a roundhouse and telling him........ahhhhhhhhh you probably know that one. ;~)

OK, I'll turn off the Citizens arrest, BUT!! I'll be watching you. ;~)

* No disrespect intended towards Frenchmen, but I will say that they used to be the butt of our jokes in Maine at least. Kinda' like I am down here in Florida. All in good fun.

T.O.

Who wonders who's the butt of Frenchmen jokes. Portugese perhaps?

Re: The Dark side of dump pick'n

#14

Shouldn't the sign on the barn read...

VLParisian

>"Sanford and Son" :>)

Something about the spacing of that lettering on the barn bothers me.

How one would go about correcting it is another matter.

Nice jacks there, are they spoken for?

Regards,

Victor - just finished up another round of de-rusting planes

Re: The Dark side of dump pick'n

#15

Check out the shovel in front of the bike

VLParisian

>Is that really a shovel or some sort of evel look alike? Looks like the steel brace runs half way up the handle. Now that's a handle that won't readily break.

Victor - still looking through your treasures

Re: The Dark side of dump pick'n

#16

Re: The Dark side of dump pick'n

Moses Yoder in White Pigeon, MI

>I stopped by a garage sale yesterday, should have taken a picture there. But then again, if I did you would probably stop going to the dump all together ;)

Moses, heading to the land fill Saturday not expecting to find anything and overjoyed at the prospect of having a semi organized shop.

Re: The Dark side of dump pick'n

#17

Re: Check out the shovel in front of the bike

Kevin French, Antrim, NH

>Actually Victor the shovel IS broken. It's a 'Post Hole Shovel', and should have about a 6' handle on it.

Re: The Dark side of dump pick'n

#18

Re: Shouldn't the sign on the barn read...

Ernie Miller

>they ren out of O's at the dump it's suposed to sas WE LOCO ME

Kevin did I ever tell you I was a poor workin man that only could aford one plane a #5 with a busted out side and a kinked worrented superior hand saw? my chisel is an old table knife I found and sharpened it on a rock. It works Ok with the tree limb I use as a mallet.

Re: The Dark side of dump pick'n

#19

We're carying that Neanderthal thing a bit far

Kevin French, Antrim, NH

>

Re: The Dark side of dump pick'n

#20

What! You have a saw?!

Todd O. Cronkhite Maine Native, Presently Away

>All I have is a jagged piece of glass from one of my great-grand-daddy's broken whiskey bottles. Sure wishin' I had me a real saw.

T.O.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.