WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Longish - No pictures, but first day back

Posts

Longish - No pictures, but first day back

#1

Longish - No pictures, but first day back

VLParisian

>in the shop since well before my surgery.

I was in the shop a lot yesterday and today for the first time in about 3-1/2 months. Where did all the junk on the work bench come from? Where is my camera when I need it?

I couldn't believe the layer of rust on all cast iron surfaces. I'm sure it would have been worse if I hadn't waxed everything some time ago. I spent most of my time cleaning up and rewaxing the table saw (read horizontal surface that collects things), the jointer and the band saw. Next up are the planes. What a mess!

I've been running the dehumidifier around the clock for the past week and a half, pulling about two gallons of water out of the air each day. (Did I mention It has rained here about 27 out of the last 30 days.) Just today I noticed some green moldy looking stuff on some cherry wood I have been planning on using in my next project. Whatthehey?? This can't be good. Now it looks like I'll have to go through my whole stash. Anybody want some "green" wood?

Still, overall much better than a day at the office.

Victor - in Hot and Humid Houston

Re: Longish - No pictures, but first day back

#2

Re: Longish - No pictures, but first day back

Todd O. Cronkhite Maine Native, Presently Away

>Welcome back Vic, glad that you're recovered to the point of being able to get back into the shop. I am however quite concerned with the following statement:

I spent most of my time cleaning up and rewaxing the table saw (read horizontal surface that collects things), the jointer and the band saw. Next up are the planes.

Seems that during your hiatus your priorites got out of whack! :~O

T.O.

Re: Longish - No pictures, but first day back

#3

Re: Longish - No pictures, but first day back

Ernie Miller

>Get the brooder lamps out and get some heat light on that grteen wood it looks like you may end up with some spalted cherry? that can't be good can it? Glad to hear you are back in the shop rusty or not.

Re: Longish - No pictures, but first day back

#4

Re: Longish - No pictures, but first day back

VLParisian

>Todd, My priorities are right, the planes are just so damned depressing to look at right now that I couldn't bring myself to start on them just yet.

I did find the instructions to the dehumidifier while picking up a bit. I see where I can attach a garden hose to it. No more emptying the bucket. :>)

Victor - back at work and not enjoying it.

Re: Longish - No pictures, but first day back

#5

Bummer...

Scott Burr in Ben Lomond CA

>The rust bunnies envaded the shop and had an orgy. Well looks like you have some work a head of you. Wax on wax off...

Re: Longish - No pictures, but first day back

#6

Hey Scott, Thanks I needed that.

VLParisian

>

Re: Longish - No pictures, but first day back

#7

dehumidifier follow up: 3- 1/2 gallons today.

VLParisian

>

Re: Longish - No pictures, but first day back

#9

3.5 gallons -- not too surprising?

wilbur

>I was bored, and started doing some math. Here's what I figured out.

- Houston relative humidity: ~80%

- Amount of water in the air at Houston's relative humidity and temperature at this time of year: 25 g H2O/kg air

- Density of air: 1.2 kg/m3

- Density of water: 3785 grams/gallon

If I multiply all this out, I get that at this time of year in Houston, 126 cubic meters of air will hold one gallon of water. That's 4450 cubic feet, or about the volume of a 22'x20'x10' shop. Circulate that volume of air 3.5 times over the course of a day, and that's your 3.5 gallons of water.

Re: Longish - No pictures, but first day back

#10

Re: 3.5 gallons -- not too surprising?

VLParisian

>Yes, but this is with an a/c unit running on low at the same time.

Must admit that even with a/c set at 82 walking into the shop last evening sure felt good. I mean the house a/c is set to hold 76 degrees and the shop felt cooler at 82.

Got to start disassembling planes this evening to see just how bad they realy are. I'll try to post a pic or two.

Victor - No rain in two days here in Houston

Re: Longish - No pictures, but first day back

#11

Re: 3.5 gallons -- not too surprising?

wilbur

>Well, guesstimating that with your A/C on your relative humidity indoors is more like 50%, that only cuts down the amount of water in the air by half, which means circulating the air 7 times in a 22'x20'x10' shop over the course of a day.

There's a lot of water in air.

Re: Longish - No pictures, but first day back

#12

Rust followup...

VLParisian

>Well, I took apart a block plane and a bedrock 603 and found only superficial rust. Looks like most of the rust I was seeing was on the upper part of the blades on an old #6 and a 5-1/2 Stanley. Nothing here that a little fussing and TLC won't fix.

Regards from Houston,

Victor

Re: Longish - No pictures, but first day back

#13

And what better way to settle in at the shop

Bill Houghton, Sebastopol, CA

>than fussing and TLC?

Re: Longish - No pictures, but first day back

#14

Working on a bunch of planes and

VLParisian

>listening to "Get the Lead Out" evening programing on 93.7 FM here in Houston - A whole hour of Lead Zeplin. :>)

Cleaned up a stanley #3, a 5-1/4 (one of my favorites) and a BU block plane. Even made some curly gossamer like shavings.

Life is good.

Victor - getting back in the groove

Re: Longish - No pictures, but first day back

#15

Re: Working on a bunch of planes and

Todd O. Cronkhite Maine Native, Presently Away

>From the sounds of it you should be listening to Molly Hatchet's "Flirtin' With Disaster". coarse, based upon my recent diatribe about foreign made products, perhaps I should give it a spin as well. :~O

T.O.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.