WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Holtzapfel in the wild?

Posts

Holtzapfel in the wild?

#1

Holtzapfel in the wild?

Stephen Kirk in Quakertown PA

>I found this lovely bench at the Museum of American Frontier Culture in Staunton, VA. It sure looks like the designs of a Holtzapfel (hope I spelled that right) workbench that I've seen Chris Schwarz put out in Pop Woodworking and on his blog. I'd guess the user was a lefty by the position of the leg vise. In the tool tray were hollow square shafts that I believe fit in the dog holes. I haven't seen anything like that before. There was a well used bench hook, and by the nice old hunk of wax I'd guess somebody did a lot of sawing and planing. Oddly enough, I saw this in the American barn, not in the German barn where I would have expected it.

There are two nice treddle lathes that I'll also post later, if people are interested.


img

Re: Holtzapfel in the wild?

#2

Another pic, from the side

Stephen Kirk in Quakertown PA

>

Re: Holtzapfel in the wild?

#3

And now, one with the other pic attached! 

Stephen Kirk in Quakertown PA

>


img

Re: Holtzapfel in the wild?

#4

Thanks..

Greg B�tit, Vergennes VT

>..for posting the pix & "yes" to interest in the lathes.

greg

Re: Holtzapfel in the wild?

#5

Re: Thanks..

Todd O. Cronkhite Maine Native, Presently Away

>Correct me if I'm wrong, but it also appears to have a wagon vise ala Chris. At least that what it looks like judging from that big square hole on the left end of the bench.

I hafta' wonder why there is a blacksmith's post vise attached to the bench. I'm thinking that the musem folks just stuck it on there.

Also looks like the top was constructed of enge jointed 3x3's or 4x4's, very similiar to the way myself and others have, and do do today with 2x4's and such.

Nice bench and it's good to see it. Like to see the lathes as well.

T.O.

do do? Can that be right?

Re: Holtzapfel in the wild?

#6

A shot of the wagon vice

Stephen Kirk in Quakertown PA

>Yeah, I'm pretty sure that's a wagon vice. I had a closer shot of that one too. I also got a pic of the blacksmith's vice. Nobody was in the barn when I was checking this out, so I couldn't ask. It looks like they just put a lot of equipment in the barn you would generally find (or that the museum acquired). It was an animal barn, so I could see something for blacksmithing would be handy.

Oh, be careful where you do do. Most people have to clean that up.


img

Re: Holtzapfel in the wild?

#7

Isn't that more like a nicholson?

dave brown

>

Re: Holtzapfel in the wild?

#8

Re: Thanks..

vlparisian - Houston

>Todd, You have some realy sharp eys to spot that one. I went back and looked even after the wagon vice picture was posted and somewhat convinced myself you were right.

Victor

Re: Holtzapfel in the wild?

#9

I was hung up on the blacksmith's vise.

vlparisian - Houston

>

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.