Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Japanese Finishing Stone Help Needed

Posts

Japanese Finishing Stone Help Needed

#1

Japanese Finishing Stone Help Needed

Hank Knight from SC

>I just purchased a nice natural finishing stone from Kayoko at Misugi designs. I assume the care and maintenance of a natural water stone is different from the way I treat my Nortons. Can anybody point me in the direction of some good instructional information on the use and care of these stones? It was an expensive purchase (for me anyway) and I want to make sure I use it properly and don't ruin it out of ignorance.

Thanks.

Hank

Re: Japanese Finishing Stone Help Needed

#2

Re: Japanese Finishing Stone Help Needed *LINK*

wilbur

>The easy thing would be to ask Kayoko what she recommends. I've found her to be very helpful even after the purchase. Below is a link to an article on the care of natural Japanese waterstones.

One of the big differences between your Nortons and the waterstone you just purchased is that you should not soak the Japanese waterstone before using it. Pouring water liberally over the sharpening surface will be good enough. I seem to remember that it is recommended that Norton stones be stored in water as well. Don't do this with a natural Japanese waterstone.


Natural Japanese waterstone care

Re: Japanese Finishing Stone Help Needed

#3

Re: Japanese Finishing Stone Help Needed

wilbur

>P.S. Any details on your new waterstone?

Re: Japanese Finishing Stone Help Needed

#4

Re: Japanese Finishing Stone Help Needed

Hank Knight from SC

>Thanks, Wilbur. Your comments and the Japan Woodweorker article are just what I was looking for.

No details yet on the stone. Kayoko has been looking for a stone for me for 5 or 6 months. She called yesterday to tell me that she had found a good one, that it had "arrived on the boat," and that she was shipping it to me immediately. The price was steeper that I had imagined, but so what? I only plan to get stoned once. I need to e-mail her for details and I'll ask for her suggestions on flattening, maintenance, etc.

Thanks again for your information and the Japan Woodworker article. I'll post more when I get the stone and hear from Kayoko.

Hank

Re: Japanese Finishing Stone Help Needed

#5

Re: Japanese Finishing Stone Help Needed------WebK

wilbur

>P.S. Any details on the waterstone you got?