Re: Pssst ..... Secrets Revealed !
ThomD
>Just take the magnet part of that. Some material need to be heated above the de-mag temp, O1 for instance, the mag is still useful, but not sufficient. Some material need to be held at "that" temp for a period of time before the quench, which is easy enough to do in an oven, but not in an open flame, so you need to know the technique for that. Some materials need to be instantly placed in the quench, others you can be casual about. Sometimes you need to heat the quench to a specific temperature to get it to cool the metal fast enough (??). Just about everything you do while forging can affect he final result when you turn to heat treating. One could go on for pages.
Todd is correct that you can do as he has suggested, and end up with a good result every time. In fact I sometimes wonder why everyone doesn't just try a small project like a screw drive, right now... I'll wait till you get back...
But that is like a beginer finishing his first wood project with Watco oil, and getting a really nice result. Doesn't mean the guy doing museum level retoration doesn't know a few more tricks.